
1 / 3 · Click to enlarge
At a glance
Made by SmartElex, this smartelex dc motor drivers is a good fit for makers, students and electronics hobbyists. Main specs: model no. / name Motor Driver HAT; continuous discharge current (a) 10; weight (g) 36. Check that your power source supplies 6 to 28 before connecting it.
Key Highlights
- Model No. / Name: Motor Driver HAT
- Continuous Discharge Current (A): 10
- Weight (g): 36
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Check the size, weight and connector against your model, and keep spare props or parts for the first flights.
Specifications
| Model No. / Name | Motor Driver HAT |
|---|---|
| Continuous Discharge Current (A) | 10 |
| Voltage Rating (V) | 6 to 28 |
| PWM Frequency Range (KHz) | 32 Khz |
| Weight (g) | 36 |
| Additional Specs. | Peak Motor Current for 10 Sec: 30 A VIOH (Logic Input – High Level): 3~5.5 V VIOL (Logic Input – Low Level): 0~ 0.5V |
| Shipping Weight | 0.039 kg |
| Shipping Dimensions | 10 × 6 × 3 cm |
Overview
The SmartElex 10D DC Motor Driver HAT for Raspberry Pi, made by SmartElex, is listed in our smartelex dc motor drivers range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Model No. / Name: Motor Driver HAT
- Continuous Discharge Current (A): 10 (your supply must deliver at least this much current)
- Voltage Rating (V): 6 to 28 (match this to your power supply; too high a voltage can damage the part)
- PWM Frequency Range (KHz): 32 Khz (quoted range is usually line-of-sight; walls and interference shorten it)
- Weight (g): 36 (important for drones, RC models and anything you carry)
- Additional Specs.: Peak Motor Current for 10 Sec: 30 A VIOH (Logic Input – High Level): 3~5.5 V VIOL (Logic Input – Low Level): 0~ 0.5V (your supply must deliver at least this much current)
- Shipping Weight: 0.039 kg (important for drones, RC models and anything you carry)
- Shipping Dimensions: 10 × 6 × 3 cm (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
With SmartElex 10D DC Motor Driver HAT for Raspberry Pi let your robotic dreams come true with the new Motor Driver HAT from Robulabs. This Raspberry Pi add-on is perfect for any motion project as it can drive 2 DC motors with full PWM speed control. Brush DC motors Driver are the most widely used drivers due to their low cost and simple drive control options. But since the Raspberry Pi does not have a lot of PWM pins, we have design use aully-dedicated PWM driver HAT with onboard control to both motor direction and speed which can be easily interfaced with all versions of Raspberry Pi you already have.
SmartElex 10D DC Motor Driver HAT is powerful motor driver board. This motor driver is fabricated with great specifications that make it useful for a wide variety of mechatronics. The wide operating voltage range and easy to interface with microcontrollers (MCU) which allows you to quickly adopt this module into applications.
How to Use:
SmartElex 10D can be controlled in two ways as follows
1. Using 2-control signals to control the speed and direction of the motor. PWM is feed to the PWM pin to control the speed while DIR pin is used to control the direction of the motor.
2. Only 1 control signal is needed to control the speed and direction of the motor. PWM pin is connected to logic high while the DIR pin is being fed with the PWM signal. When the PWM signal has a 50% duty cycle, the motor stops running. If the PWM has less than 50% duty cycle, the motor will turn CW (or CCW depending on the connection). If the PWM signal has more than 50% duty cycle, the motor will turn CCW (or CW depending on the connection).
Note: Colour of the product may vary based on availability. Some basic information about motor drivers, their controlling modes, and a comparison table is provided in this article. Click here to read.
Features:
- Wide 6V to 28V motor Operating Voltage.
- Continuous 10A maximum current without Heatsink and 30A peak current for 10 Seconds.
- Two brushed DC motor Bidirectional control.
- Current limiting at 35A.
- PWM frequency up to 32KHz
- Support TTL PWM from the microcontroller
- Internal thermal shutdown
- Under-voltage lockout
- PWM and direction controlled driving of four externally powered NMOS transistors
- 3V and 5V logic level input.
Package Includes:
1 xSmartElex 10D DC Motor Driver HAT 1 x User Manual
Quick specs
- Model No. / Name
- Motor Driver HAT
- Continuous Discharge Current (A)
- 10
- Voltage Rating (V)
- 6 to 28
- PWM Frequency Range (KHz)
- 32 Khz
- Weight (g)
- 36
- Additional Specs.
- Peak Motor Current for 10 Sec: 30 A VIOH (Logic Input – High Level): 3~5.5 V VIOL (Logic Input – Low Level): 0~ 0.5V





















