Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

The SmartElex A4988 is a compact stepper motor driver module for precise motor control in DIY and embedded projects. It handles 8-35 VDC and up to 2 A per coil, with selectable microstepping up to 1/16 and built-in thermal and short-circuit protection.

Key Highlights

  • Wide 8-35 VDC motor supply range
  • Up to 2 A per coil with proper cooling
  • Selectable microstepping: full, 1/2, 1/4, 1/8, 1/16
  • 3-5.5 V logic compatibility
  • Thermal shutdown and short-circuit protection
  • Compact 22 x 15 x 2 mm module

Ideal For

  • 3D printer builders upgrading or replacing axis drivers
  • CNC and engraving machine hobbyists
  • Robotics enthusiasts needing precise motor control
  • DIY automation and motion-control projects
  • Electronics learners exploring stepper motor drives

Buying Tip

Check that your stepper motor’s rated current is within the 1-2 A range and plan for a heatsink or airflow if you intend to run near the upper limit.

Elecvora expert review

Our verdict

The SmartElex A4988 is a dependable, compact stepper driver that covers a wide voltage range and offers useful microstepping options for hobbyist and light professional use. Its integrated protection features and simple step/direction interface make it a solid choice for 3D printers, CNC builds and robotics projects.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Wide 8-35 VDC motor supply range
  • Selectable microstepping up to 1/16
  • Built-in thermal, overcurrent and short-circuit protection
  • 3-5.5 V logic compatibility
  • Very small and lightweight

Cons

  • Requires a heatsink or airflow for sustained high-current operation
  • No heatsink included in the package
  • Motor and logic supplies must be provided separately

Best for

3D printer and CNC hobbyists needing a compact, protected stepper driver

Not ideal for

Projects requiring driver-integrated motion planning or higher current than 2 A per coil

Specifications

Voltage Rating (V)8 to 35VDC
Current Rating (A)1 to 2
Input Voltage (VDC)8 to 35
Logic Voltage (V)3 to 5.5
Dimensions (L x W x H) mm22x15x2
Weight (g)3
Shipping Weight0.05 kg
Shipping Dimensions9 × 6 × 2 cm

What's in the box

  • 1 x SmartElex A4988 Stepper Motor Driver

Frequently Asked Questions

What is the maximum current this driver can handle?
The A4988 can deliver up to 2 A per coil, but continuous operation at that level requires proper cooling such as a heatsink or forced airflow. Always set the current limit to match your motor’s rating.
Can I use this driver with a 3.3 V microcontroller?
Yes, the logic inputs accept 3 to 5.5 V, so it works directly with 3.3 V and 5 V boards.
What microstepping modes are available?
The module supports full step, 1/2, 1/4, 1/8 and 1/16 microstepping, selectable via the MS1, MS2 and MS3 pins.
Does the package include a heatsink?
No, the package contains only the SmartElex A4988 Stepper Motor Driver module. A heatsink is not included.
What motor supply voltage should I use?
The motor supply must be between 8 and 35 VDC. Choose a voltage within this range that suits your stepper motor and application.
What protections are built into the driver?
The A4988 includes thermal shutdown, undervoltage lockout, crossover current protection, ground fault protection and short-circuit protection.

Overview

The SmartElex A4988 is a stepper motor driver module that combines a built-in translator with a DMOS output stage, making it a practical choice for precise motor control in compact projects. It accepts step and direction signals from a microcontroller and handles the sequencing required to drive a bipolar stepper motor, so you do not need to write complex commutation code. The module operates from a motor supply of 8 to 35 VDC and can deliver up to 2 A per coil when adequate cooling is provided. Logic inputs are compatible with 3 to 5.5 V systems, allowing direct connection to common 3.3 V and 5 V boards.

Key Features

  • Automatic current decay mode selection: the driver chooses between slow and mixed decay to help maintain smooth current regulation and reduce audible motor noise.
  • Microstepping control: five step resolutions are available—full, 1/2, 1/4, 1/8 and 1/16—for finer positioning and quieter operation.
  • Integrated protection: thermal shutdown, undervoltage lockout, crossover current protection, ground fault protection and short-circuit protection help prevent damage under fault conditions.
  • Synchronous rectification: lowers power dissipation for cooler running compared with simple linear drive schemes.
  • Compact footprint: measuring just 22 x 15 x 2 mm and weighing 3 g, the module fits easily into space-constrained builds.

Specifications Explained

Voltage rating (8-35 VDC): this is the motor supply range. Choose a supply within these limits to power the stepper motor; the driver itself is not a voltage regulator for the motor.

Current rating (1-2 A): the module can deliver up to 2 A per coil, but continuous operation near the upper limit requires proper cooling, such as a heatsink or airflow. Always set the current limit to match your motor’s rating.

Logic voltage (3-5.5 V): the step, direction and enable inputs accept logic signals in this range, making the driver compatible with 3.3 V and 5 V microcontrollers.

Dimensions and weight: at 22 x 15 x 2 mm and 3 g, the board is small and light enough for portable and densely packed assemblies.

Compatibility and Requirements

The A4988 requires a motor supply between 8 and 35 VDC and logic signals between 3 and 5.5 V. It is intended for bipolar stepper motors; the product data does not specify support for other motor types. A microcontroller or signal generator is needed to provide step and direction pulses. Ensure the current limit is configured for your motor and that cooling is adequate if running near 2 A per coil. The module does not include a heatsink in the package.

Typical Uses

  • 3D printer extruder and axis drives
  • CNC routers and engraving machines
  • Robotics and automated positioning systems
  • Camera sliders and motion-control rigs
  • General DIY projects requiring precise stepper control

What's in the Box

1 x SmartElex A4988 Stepper Motor Driver module.

Quick specs

Voltage Rating (V)
8 to 35VDC
Current Rating (A)
1 to 2
Input Voltage (VDC)
8 to 35
Logic Voltage (V)
3 to 5.5
Dimensions (L x W x H) mm
22x15x2
Weight (g)
3
See all specifications