
1 / 3 · Click to enlarge
AI Summary
A 2.4GHz WiFi breakout board based on the Ebyte E103-W08 serial-to-WiFi module, configurable over AT commands. It adds 802.11b wireless with WPA/WPA2 encryption plus TCP, HTTP client and MQTT support to embedded projects.
Key Highlights
- 2.4GHz 802.11b WiFi serial-to-WiFi breakout board
- WPA and WPA2 encryption for secured wireless links
- AT command configuration plus WiFi scanning support
- Regular TCP, HTTP client and MQTT network communication
- 2.5 to 3.6V supply with 3.3V communication level
- Operates from -40 °C to +85 °C for varied environments
Ideal For
- Embedded developers adding WiFi to microcontroller projects
- IoT hobbyists building MQTT sensor nodes
- Students learning AT-command WiFi modules
- Makers prototyping remote monitoring links
- Engineers needing a 3.3V serial-to-WiFi breakout
Buying Tip
Confirm your host board uses 3.3V logic and can supply enough current for the 130mA transmit peak before wiring this module in.
Elecvora expert review
Our verdict
A tidy, no-fuss breakout for anyone who needs a 2.4GHz WiFi link on a 3.3V embedded design. AT commands and included headers keep the first build simple, while TCP, HTTP client and MQTT cover common IoT patterns.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- 802.11b WiFi with WPA and WPA2 encryption
- AT command setup and WiFi scanning
- TCP, HTTP client and MQTT support
- Wide 2.5 to 3.6V supply range
- Headers included for prototyping
Cons
- Limited to the 802.11b standard
- Requires a host controller and serial adapter
- Headers must be soldered before use
Best for
3.3V microcontroller projects needing a simple serial WiFi link
Not ideal for
Applications requiring newer WiFi standards or built-in USB
Specifications
| Item Type | Breakout Board |
|---|---|
| Operating Voltage (V) | 2.5 to 3.6 |
| Frequency Rating | 2.4GHz |
| Communication Level | 3.3V |
| Operating Temperature (°C) | -40 °C to +85 °C |
| Bandwidth | 2.412G~2.472G |
| Emission Current | 130mA |
| Shipping Weight | 0.03 kg |
| Shipping Dimensions | 10 × 5 × 2 cm |
What's in the box
- 1 x SmartElex E103-W08A Ebyte 2.4GHz WiFi Breakout Board
- 3 x Male Headers
Frequently Asked Questions
What voltage does the board need?
How do I configure the WiFi settings?
Which network protocols are supported?
What is included with the board?
What current should I plan for?
What temperature range does it support?
Overview
The SmartElex E103-W08A is a breakout board built around the Ebyte E103-W08 2.4GHz WiFi serial module. Its job is simple: give a host microcontroller or embedded design a wireless network connection without building RF circuitry from scratch. The module handles the WiFi side while your controller talks to it over a 3.3V communication level, and configuration is done through AT commands.
Because the board is a breakout, the module's pins are brought out for breadboards, headers and prototyping boards. Three male headers are included, so you can solder them on and start wiring the board into a project.
Key Features
- 802.11b WiFi at 2.4GHz: a straightforward wireless link for embedded data projects.
- WPA and WPA2 encryption: secured connections for standard wireless scenarios.
- AT command control: set parameters and scan for WiFi networks using familiar AT instructions.
- Multiple network protocols: regular TCP, HTTP client and MQTT communication are supported.
- Flexible supply range: operates from 2.5V to 3.6V with a 3.3V communication level.
- Wide temperature range: rated from -40 °C to +85 °C.
Specifications Explained
The 2.412G to 2.472G bandwidth covers the standard 2.4GHz WiFi channels used by most home and office networks. The 130mA emission current gives you a figure to plan your power supply around when the radio is transmitting, so choose a regulator with headroom for your host board as well.
The 2.5 to 3.6V operating voltage and 3.3V communication level mean the board is intended for 3.3V logic designs. If your controller runs at a different logic level, check compatibility before connecting the data lines. The -40 °C to +85 °C operating temperature range makes the board suitable for enclosures and installations that see temperature swings.
Compatibility and Requirements
The board requires a 2.5 to 3.6V supply and communicates at a 3.3V level. You will need a host microcontroller or USB-to-serial adapter to send AT commands and exchange data. A 2.4GHz WiFi network is required for wireless operation, and WPA or WPA2 security can be used. Because only the listed protocols are supported, confirm your application can work over regular TCP, HTTP client or MQTT before designing it in.
Typical Uses
- Adding WiFi to microcontroller projects and prototypes
- Sensor nodes that publish data over MQTT
- Remote monitoring and simple IoT data links
- HTTP client tasks that send data to a server
- Breadboard experiments with AT-command WiFi modules
What's in the Box
- 1 x SmartElex E103-W08A Ebyte 2.4GHz WiFi Breakout Board
- 3 x Male Headers
Quick specs
- Item Type
- Breakout Board
- Operating Voltage (V)
- 2.5 to 3.6
- Frequency Rating
- 2.4GHz
- Communication Level
- 3.3V
- Operating Temperature (°C)
- -40 °C to +85 °C
- Bandwidth
- 2.412G~2.472G



















