Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A breakout board for the MT7628AN platform that delivers 2.4GHz 802.11b/g/n WiFi with 20 to 24dBm transmit power and a 580MHz processor. It exposes SPI, I2C, I2S, UART, JTAG, GPIO, USB 2.0 host and Ethernet interfaces for custom development.

Key Highlights

  • 2.4GHz IEEE 802.11b/g/n WiFi with 20 to 24dBm transmit power
  • 580MHz main frequency for on-board data processing
  • Rated ideal range of around 200 metres
  • AP, STA and mixed AP plus STA operating modes
  • USB 2.0 host, SPI, I2C, I2S, UART, JTAG and GPIO breakout
  • UFL antenna and three male headers included

Ideal For

  • Embedded developers building OpenWrt-based WiFi devices
  • IoT integrators prototyping gateways with Ethernet and USB
  • Makers exploring MT7628AN custom firmware
  • Lab and classroom projects on 2.4GHz networking
  • Product teams evaluating a low-cost WiFi module platform

Buying Tip

Check that your project can supply the board's own power and programming setup before ordering, since only the board, UFL antenna and headers are included.

Elecvora expert review

Our verdict

A sensible choice for developers who want the MT7628AN interface set on a usable carrier board without building their own breakout. The included antenna and headers remove two small but annoying sourcing steps.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Full interface breakout including USB 2.0 host and Ethernet ports
  • 580MHz processing keeps network work on the module
  • AP, STA and mixed modes cover most topologies
  • UFL antenna and headers included

Cons

  • Requires your own power supply and programming setup
  • No enclosure or mounting hardware supplied
  • Real-world range will fall short of the 200 metre ideal figure indoors

Best for

Embedded developers and IoT integrators prototyping 2.4GHz WiFi devices

Not ideal for

Buyers wanting a plug-and-play consumer WiFi adapter

Specifications

Item TypeBreakout Board
Frequency Rating2.4GHz
Transmit Power (dBm)20~24
WiFi ProtocolIEEE 802.11b/g/n
Ideal Range(m)200
Main Frequency580 MB
Shipping Weight0.03 kg
Shipping Dimensions10 × 5 × 2 cm

What's in the box

  • 1 x SmartElex E103-W20(7628) Ebyte Breakout Board
  • 1 x UFL Antenna
  • 3 x Male Headers

Frequently Asked Questions

What can I do with this breakout board?
It exposes the MT7628AN platform's interfaces for custom development, including WiFi, Ethernet, USB 2.0 host, SPI, I2C, I2S, UART, JTAG and GPIO. It is intended for prototyping and product development rather than simple plug-in use.
Does it support OpenWrt?
Yes, the module supports OpenWrt operating systems and custom secondary development according to the product data. You will need to source and flash your own firmware build.
What power supply do I need?
The product data does not specify a voltage or current rating, so confirm the requirements for your specific board revision before connecting power. Use a regulated supply and avoid powering it from an unverified source.
Is an antenna included?
Yes, one UFL antenna is included along with three male headers. Connect the antenna before powering the board and keep it clear of shielding metal.
What is the realistic wireless range?
The ideal range is rated at 200 metres. Indoor walls, interference and antenna placement will reduce this, so test at your actual site before committing to a layout.
How should I store and handle the board?
Keep it in an anti-static bag or on a grounded mat, and avoid touching the module shield or connector pins. Store it away from moisture and static-prone packaging.

Overview

The SmartElex E103-W20(7628) Ebyte Breakout Board is a carrier board built around the MT7628AN platform. It brings the module's interfaces out to accessible headers so you can prototype, wire and test without working at bare-module scale. The board operates in the licence-free 2.4GHz ISM band and supports IEEE 802.11b/g/n, making it a practical starting point for connected devices, gateways and cloud-service endpoints.

With a 580MHz main frequency, the board handles data processing on the module itself rather than leaning entirely on a host controller. Transmit power is rated at 20 to 24dBm, and the ideal range is quoted at 200 metres, giving you a realistic planning figure for open-air links.

Key Features

  • Dual-role WiFi: supports AP, STA and mixed AP plus STA modes for flexible network topologies.
  • Channel bandwidth options: 20 and 40 channel bandwidth with 802.11b/g/n and 802.11v support.
  • Rich interface breakout: SPI, I2C, I2S, UART, JTAG, GPIO, SD-XC and eMMC connections are exposed.
  • USB 2.0 host: one host interface for peripherals and storage.
  • Ethernet ready: five 10/100M adaptive network ports are available on the platform.
  • OpenWrt and custom development: the module supports OpenWrt operating systems and secondary development.

Specifications Explained

Frequency and protocol

The 2.4GHz rating means the board works in the widely used, licence-free ISM band. IEEE 802.11b/g/n support covers legacy and modern 2.4GHz clients, and 20/40 channel bandwidth lets you trade throughput against spectrum congestion.

Transmit power and range

At 20 to 24dBm, the board offers a solid link budget for building-to-building or wide-area sensor coverage. The 200 metre ideal range figure is a planning reference; walls, antenna placement and interference will change real results.

Processing

A 580MHz main frequency gives the module enough headroom for network stack work and light application logic, which is why it suits OpenWrt-based designs and custom firmware.

Compatibility and Requirements

The board is intended for developers working with the MT7628AN platform and OpenWrt. You will need your own power source, host equipment and programming setup, since none of these are supplied. The included UFL antenna connects to the board's antenna connector; plan enclosure space so the antenna is not shielded.

Typical Uses

  • IoT gateways and cloud-connected sensor nodes
  • OpenWrt development and custom firmware projects
  • Smart device prototypes with Ethernet and USB peripherals
  • Wireless bridging and AP plus STA mixed-mode setups
  • Educational and lab work on embedded networking

What's in the Box

  • 1 x SmartElex E103-W20(7628) Ebyte Breakout Board
  • 1 x UFL Antenna
  • 3 x Male Headers

Quick specs

Item Type
Breakout Board
Frequency Rating
2.4GHz
Transmit Power (dBm)
20~24
WiFi Protocol
IEEE 802.11b/g/n
Ideal Range(m)
200
Main Frequency
580 MB
See all specifications