Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by SmartElex, this smartelex zigbee modules is a good fit for makers, students and electronics hobbyists. Main specs: item type Breakout Board; operating voltage (v) 2.5 to 3.6; supported protocols ZigBee3.0. Check that your power source supplies 2.5 to 3.6 before connecting it.

Key Highlights

  • Item Type: Breakout Board
  • Operating Voltage (V): 2.5 to 3.6
  • Supported protocols: ZigBee3.0

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeBreakout Board
Operating Voltage (V)2.5 to 3.6
Supported protocolsZigBee3.0
Operating Temperature (°C)-40 ~ +85℃
Communication InterfaceUART
Antenna InterfaceIPEX-1
Shipping Weight0.03 kg
Shipping Dimensions10 × 5 × 2 cm

Overview

The SmartElex E18-2G4Z27SI 2.4GHz ZigBee Breakout Board, made by SmartElex, is listed in our smartelex zigbee modules range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Breakout Board
  • Operating Voltage (V): 2.5 to 3.6 (match this to your power supply; too high a voltage can damage the part)
  • Supported protocols: ZigBee3.0 (confirm your cable or board uses the same connector)
  • Operating Temperature (°C): -40 ~ +85℃
  • Communication Interface: UART (confirm your cable or board uses the same connector)
  • Antenna Interface: IPEX-1 (confirm your cable or board uses the same connector)
  • Shipping Weight: 0.03 kg (important for drones, RC models and anything you carry)
  • Shipping Dimensions: 10 × 5 × 2 cm (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

E18 series is a 2.4GHz frequency band ZigBee communication protocol-to-serial wireless module designed and produced by Ebyte. The factory comes with self-organizing network firmware, ready to use, suitable for a variety of application scenarios (especially smart home). The E18 series module adopts CC2530 RF chip imported from Texas Instruments. The chip integrates 8051 single-chip microcomputer and wireless transceiver. Some module models have built-in PA power amplifier to increase the communication distance. The factory-built firmware implements serial data transparent transmission based on the ZigBee3.0 protocol, and supports various commands under the ZigBee3.0 protocol. After actual measurement, it has very good compatibility with most ZigBee3.0 products on the market.

Features: 

  • Supporting protocol - ZigBee3.0
  • Operating Voltage- 2.5 ~ 3.6V
  • Operating temperature - -40 ~ +85℃
  • Network self-healing
  • Ultra-low power consumption
  • Data retention time setting
  • Channel change: Support 16 channel changes (2405-2480MHZ) from 11 to 26, and different channels correspond to different frequency.

Package Includes: 

1 x SmartElex E18-2G4Z27SI 2.4GHz ZigBee Breakout Board

1 x UFL Antenna

3 x Male Headers

Quick specs

Item Type
Breakout Board
Operating Voltage (V)
2.5 to 3.6
Supported protocols
ZigBee3.0
Operating Temperature (°C)
-40 ~ +85℃
Communication Interface
UART
Antenna Interface
IPEX-1
See all specifications