Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by SmartElex, this smartelex zigbee modules is a good fit for makers, students and electronics hobbyists. Main specs: item type Breakout Board; operating voltage (v) 3.8; storage temperature (°c) -40 +125. Check that your power source supplies 3.8 before connecting it.

Key Highlights

  • Wireless connection
  • Item Type: Breakout Board
  • Operating Voltage (V): 3.8
  • Storage Temperature (°C): -40 +125

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeBreakout Board
Operating Voltage (V)3.8
Operating humidity10 ~ 90 %
Storage Temperature (°C)-40 +125
Communication Distance(m)1300
Output Frequency38.4MHz
Interface1.27mm
Flash256KB
Operating Temperature (°C)-40 ~ +80
Shipping Weight0.03 kg
Shipping Dimensions10 × 5 × 2 cm

Overview

The SmartElex E180-ZG120B Wireless Amplifier Zigbee 3.0 Breakout Board, made by SmartElex, is listed in our smartelex zigbee modules range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Breakout Board
  • Operating Voltage (V): 3.8 (match this to your power supply; too high a voltage can damage the part)
  • Operating humidity: 10 ~ 90 %
  • Storage Temperature (°C): -40 +125 (space for firmware, files or media)
  • Communication Distance(m): 1300
  • Output Frequency: 38.4MHz (make sure the rest of your system works at this frequency)
  • Interface: 1.27mm (confirm your cable or board uses the same connector)
  • Flash: 256KB (space for firmware, files or media)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

E180-ZG120A/B is a ZIGBEE module designed and produced by Chengdu Ebyte based on Silicon Labs EFR32MG1B series wireless SOC with small size, low power consumption, high reliability and working in the 2.4GHz frequency band. The chip comes with a high-performance 32-bit module. ARM Cortex-M4 core, integrated power amplifier, transmit power up to 20dBm. EFR32 is a wireless microcontroller with great potential to become the preferred wireless microcontroller for future smart furniture, IoT transformation, and industrial automation. Its network characteristics conform to the ZIGBEE 3.0 standard and provide a complete application integration solution based on the IEEE802.15.4 standard ISM frequency band. The products have been tested and certified by a series of authoritative RF instruments, combined with years of market experience and the actual needs of users in the industry, the extremely complex communication protocols of wireless products are integrated into the built-in SoC, the serial port transparent transmission mode is supported, and the integration is fast and easy. It provides multi-channel configurable ADC, IO, and PWM interfaces, which greatly simplifies the complex development process of wireless products, so that your products can be quickly put into the market at a lower cost.

Features: 

  •   Operating voltage- 3.8V
  • Communication distance - 1300m Clear and open environment, antenna gain 5dBi, antenna height 5 meters, air rate 250kbps
  • supporting agreement - Zigbee 3.0
  • Antenna interface - IPEX/PCB(E180-ZG120A) stamp hole/IPEX(E180-ZG120B
  •  Transmit power (dBm) -20dBm max

Package Includes: 

1 x SmartElex E180-ZG120B Wireless Amplifier Zigbee 3.0 Breakout Board

Quick specs

Item Type
Breakout Board
Operating Voltage (V)
3.8
Operating humidity
10 ~ 90 %
Storage Temperature (°C)
-40 +125
Communication Distance(m)
1300
Output Frequency
38.4MHz
See all specifications