Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by SmartElex, this smartelex zigbee modules is a good fit for makers, students and electronics hobbyists. Main specs: item type Development Board; operating temperature (°c) –40 ~ 85 °C / - 40~105 °C; data rate up to 150 Mbps. Check that your power source supplies 3 to 3.6 before connecting it.

Key Highlights

  • Item Type: Development Board
  • Operating Temperature (°C): –40 ~ 85 °C / - 40~105 °C
  • Data Rate: up to 150 Mbps

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeDevelopment Board
Operating Voltage (V)3 to 3.6
Frequency Rating2412 to 2484MHz
Operating Temperature (°C)–40 ~ 85 °C / - 40~105 °C
Bandwidth20 MHz and 40 MHz bandwidth
Data Rateup to 150 Mbps
Bluetooth VersionBluetooth 5, Bluetooth mesh
Shipping Weight0.03 kg
Shipping Dimensions10 × 5 × 2 cm

Overview

The SmartElex ESP32-C6-WROOM-1-N8 Development Board, made by SmartElex, is listed in our smartelex zigbee modules range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Development Board
  • Operating Voltage (V): 3 to 3.6 (match this to your power supply; too high a voltage can damage the part)
  • Frequency Rating: 2412 to 2484MHz (make sure the rest of your system works at this frequency)
  • Operating Temperature (°C): –40 ~ 85 °C / - 40~105 °C
  • Bandwidth: 20 MHz and 40 MHz bandwidth (make sure the rest of your system works at this frequency)
  • Data Rate: up to 150 Mbps
  • Bluetooth Version: Bluetooth 5, Bluetooth mesh (check your phone or controller supports the same Bluetooth version for full range)
  • Shipping Weight: 0.03 kg (important for drones, RC models and anything you carry)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

ESP32-C6-WROOM-1 is a general-purpose Wi-Fi, IEEE 802.15.4, and Bluetooth LE module. The rich set of peripherals and high performance make the module an ideal choice for smart homes, industrial automation, health care, consumer electronics, etc. ESP32-C6-WROOM-1 module features a 4 MB external SPI flash. ESP32-C6 integrates a rich set of peripherals including SPI, parallel IO interface, UART, I2C, I2S, RMT (TX/RX), LED PWM, USB Serial/JTAG controller, MCPWM, SDIO2.0 slave controller, GDMA, TWAI® controller, on-chip debug functionality via JTAG, SOC event task matrix, as well as up to 23 GPIOs, etc.

Features: 

  • Wi-Fi • 1T1R in 2.4 GHz band • Operating frequency: 2412 ~ 2484 MHz
  • Fully compatible with IEEE 802.11b/g/n protocol • 20 MHz and 40 MHz bandwidth • Data rate up to 150 Mbps
  • Bluetooth
  • Bluetooth LE: Bluetooth 5, Bluetooth mesh
  •  High power mode (share the same PA with Wi-Fi)
  •  Speed: 125 Kbps, 500 Kbps, 1 Mbps, 2 Mbps
  • IEEE 802.15.4• Compliant with IEEE 802.15.4-2015 protocol • OQPSK PHY in 2.4 GHz band • Data rate: 250 Kbps • Thread 1.x • Zigbee 3.0

Package Includes: 

1 x SmartElex ESP32-C6-WROOM-1-N8 Development Board

2 x Male Headers

Quick specs

Item Type
Development Board
Operating Voltage (V)
3 to 3.6
Frequency Rating
2412 to 2484MHz
Operating Temperature (°C)
–40 ~ 85 °C / - 40~105 °C
Bandwidth
20 MHz and 40 MHz bandwidth
Data Rate
up to 150 Mbps
See all specifications