Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by SmartElex, this smartelex wifi and bluetooth module is a good fit for makers, students and electronics hobbyists. Main specs: item type Kit; operating voltage (v) 2.3 to 3.6; operating temperature (°c) -45 ~ +85. Check that your power source supplies 2.3 to 3.6 before connecting it.

Key Highlights

  • Item Type: Kit
  • Operating Voltage (V): 2.3 to 3.6
  • Operating Temperature (°C): -45 ~ +85

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeKit
Operating Voltage (V)2.3 to 3.6
Operating Temperature (°C)-45 ~ +85
ROM Capacity448KB
RAM520kb
SPI Flash16MB
Integrated802.11b/g/n WiFi 2.4GHz transceiver.
Shipping Weight0.03 kg
Shipping Dimensions10 × 5 × 2 cm

Overview

The SmartElex ESP32 WROOM32D-N8 Development Board, made by SmartElex, is listed in our smartelex wifi and bluetooth module range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Kit
  • Operating Voltage (V): 2.3 to 3.6 (match this to your power supply; too high a voltage can damage the part)
  • Operating Temperature (°C): -45 ~ +85
  • ROM Capacity: 448KB (space for firmware, files or media)
  • RAM: 520kb (more memory leaves room for larger programs and buffers)
  • SPI Flash: 16MB (space for firmware, files or media)
  • Integrated: 802.11b/g/n WiFi 2.4GHz transceiver. (2.4 GHz reaches further, 5 GHz is faster at short range)
  • Shipping Weight: 0.03 kg (important for drones, RC models and anything you carry)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The SmartElex ESP32 WROOM32D-N8 Development Board is a great place to get started with Espressif IoT ideations while still enjoying all the amenities of the original ESP32 WROOM Thing Plus. Espressif's ESP32 WROOM is a powerful WiFi and Bluetooth® MCU module that targets a wide variety of applications. At the core of this module is the ESP32-D0WDQ6 chip which is designed to be both scalable and adaptive. The SmartElex ESP32 WROOM with USB-C provides a µSD card slot, upgraded to a USB-C connector, integrated a RGB status LED and battery fuel gauge, and provided two voltage regulators; a separate 700mA current source for the board. It's also important to point out that a CH340C serial-to-UART bridge is used on this board; unlike previous variants. The ESP32 Thing plus integrates a rich set of peripherals, ranging from capacitive touch sensors, SD card interface, Ethernet, high-speed SPI, UART, I2S and I2C, etc. The module also features 16MB of flash memory, 520kB of internal SRAM, an integrated 802.11 b/g/n WiFi transceiver with dual-mode Bluetooth® capabilities, and a JST connector to plug in a LiPo battery.

Features: 

  • Operating Voltage: 2.3 to 3.6 V
  • Operating Temperature: -40 to 85 °C
  • MAX17048 Fuel Gauge
  • USB-C Connector
  • Integrated 802.11b/g/n WiFi 2.4GHz transceiver

Specifications: 

ESP32 WROOM Module:
  • 21 Multifunctional GPIO
  • Up to thirteen 12-bit ADC Channels
  • Up to two DAC channels
  • Up to sixteen PWM outputs
  • Up to eight capacitive touch pins
  • Up to three SPI Busses (only one is configured by default in the Arduino IDE)
  • An available I2S Audio Output
  • Up to two I2C Busses (only one is configured by default in the Arduino IDE)
  • Up to two UARTs (only two are configured by default in the Arduino IDE, one UART is used for bootloading/debug)
ESP32 WROOM General Features:
  • Operating Voltage: 2.3 to 3.6 V
  • 2.5 µA deep sleep current
  • 80 mA average operating current
  • Operating Temperature: -40 to 85 °C
  • Xtensa® Single-Core 32-bit LX6 Microprocessor (up to 240MHz)
  • 448KB of ROM and 520KB SRAM
  • 16MB of Embedded SPI flash storage
  • Integrated 802.11b/g/n WiFi 2.4GHz transceiver.

Package Includes: 

1 x SmartElex ESP32 WROOM32D-N8 Development Board

Quick specs

Item Type
Kit
Operating Voltage (V)
2.3 to 3.6
Operating Temperature (°C)
-45 ~ +85
ROM Capacity
448KB
RAM
520kb
SPI Flash
16MB
See all specifications