
1 / 3 · Click to enlarge
AI Summary
A compact ESP8266 development board with a CH340C USB-to-serial chip for simple programming over USB. It offers Wi-Fi 802.11 b/g/n, 3.3V logic and selectable 3.3V or 5V sensor support for IoT builds.
Key Highlights
- ESP8266-based ESP-12E module for 802.11 b/g/n Wi-Fi
- CH340C USB-to-serial converter for direct USB programming
- Onboard regulation for 3.3V logic operation
- Jumper-selectable 3.3V or 5V sensor supply on quick connector
- RGB interface on IO13 for direct LED control
- Works with Arduino IDE, NodeMCU and MicroPython
Ideal For
- Makers building Wi-Fi sensor nodes and home automation prototypes
- Students learning ESP8266, Arduino IDE and MicroPython
- Engineers prototyping connected devices on a breadboard
- Hobbyists adding wireless control to small projects
- Developers needing a compact USB-programmable ESP8266 board
Buying Tip
Check whether your sensors need 3.3V or 5V and set the matching jumper on the quick connector before powering your project.
Elecvora expert review
Our verdict
A tidy, compact ESP8266 board that removes the usual USB adapter hassle thanks to the onboard CH340C. The selectable sensor voltage and RGB interface make it friendly for mixed breadboard projects.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- CH340C USB interface simplifies programming
- Selectable 3.3V or 5V sensor supply
- RGB interface on IO13
- Small footprint at about 62 x 30 mm
- Works with Arduino IDE, NodeMCU and MicroPython
Cons
- Logic is 3.3V, so 5V-only peripherals need care
- No USB cable included
- Header pins must be soldered if you need them fixed
Best for
Compact Wi-Fi prototyping and IoT learning projects
Not ideal for
Projects needing 5V logic-level GPIO without level shifting
Specifications
| Item Type | Development Board |
|---|---|
| Model No. / Name | ESP8266 |
| Processor Type | Wi-Fi SoC (ESP8266-based) |
| Interface | USB (CH340C) |
| Operating Voltage (V) | 3.3 |
| Communication | Wi-Fi (802.11 b/g/n) |
| Compatibility | MicroPython, Arduino IDE, NodeMCU |
| Length (mm) | 61.9 |
| Width (mm) | 29.8 |
| Weight (g) | 08 |
| Shipping Weight | 0.017 kg |
| Shipping Dimensions | 9 × 6 × 2 cm |
What's in the box
- 1 x SmartElex ESP8266 (CH340C) WIFI Development Board
- 2 x Header Pins
Frequently Asked Questions
Do I need a separate USB-to-serial adapter?
Which development environments are supported?
What operating voltage does the board use?
What is included in the package?
How do I connect a 5V sensor?
What are the board dimensions?
Overview
The SmartElex ESP8266 (CH340C) Wi-Fi Development Board is a small, ready-to-use platform for connected projects. At its core is an ESP8266-based ESP-12E Wi-Fi module, and a CH340C USB-to-serial converter handles communication with your computer. That combination means you can plug the board into a USB port, open your preferred development environment and begin uploading code without a separate serial adapter.
The board measures 61.9 mm by 29.8 mm and weighs about 8 g, so it fits neatly into breadboards, enclosures and compact prototypes.
Key Features
- ESP-12E Wi-Fi module based on the ESP8266 SoC
- CH340C USB interface for programming and serial communication
- 802.11 b/g/n Wi-Fi connectivity
- 3.3V operating voltage with onboard regulation
- RGB interface on IO13
- Quick sensor connector with selectable 3.3V or 5V supply
- Multiple GPIO pins for peripherals
Specifications Explained
Processing and wireless
The ESP8266 Wi-Fi SoC provides the processing and networking core, with 802.11 b/g/n support for connecting to common wireless networks. This is enough for sensor reporting, remote control and simple web-connected tasks.
USB and logic voltage
The CH340C chip converts USB to serial, so a single USB connection covers both power and programming in most setups. Logic runs at 3.3V, which is the standard level for the ESP8266 and for many sensors and modules.
Sensor connector and jumpers
The quick connector simplifies wiring sensors. A short 3.3V jumper is used when working with 3.3V sensors, while a short 5V jumper is used for 5V sensors, letting one board serve mixed accessory types.
RGB interface
IO13 is broken out as an RGB interface, giving you a direct route to control an RGB LED without extra wiring complexity.
Compatibility and Requirements
The board is compatible with the Arduino IDE, NodeMCU and MicroPython. You will need a USB cable and a computer to program it, plus a suitable 3.3V-compatible sensor or module for your project. Because logic is 3.3V, check that connected devices match the board's voltage or use the selectable supply jumpers correctly.
Typical Uses
- Wi-Fi sensor nodes and data loggers
- Smart home and automation prototypes
- Wireless control and monitoring projects
- Learning embedded programming and IoT basics
- Rapid breadboard prototyping with sensors and LEDs
What's in the Box
- 1 x SmartElex ESP8266 (CH340C) WIFI Development Board
- 2 x Header Pins
Quick specs
- Item Type
- Development Board
- Model No. / Name
- ESP8266
- Processor Type
- Wi-Fi SoC (ESP8266-based)
- Interface
- USB (CH340C)
- Operating Voltage (V)
- 3.3
- Communication
- Wi-Fi (802.11 b/g/n)



















