
1 / 4 · Click to enlarge
AI Summary
A compact u-blox ZED-F9P GNSS board that provides centimeter-level RTK positioning across GPS, GLONASS, Galileo and BeiDou. It runs on 3.3-5 V with 3.3 V logic and includes a UFL antenna cable and header pins.
Key Highlights
- u-blox ZED-F9P receiver with RTK accuracy down to about 1 cm
- Tracks GPS, GLONASS, Galileo and BeiDou on L1C/A and L2C
- Fast update rates up to 25 Hz PVT and 20 Hz RTK
- Flexible 3.3-5 V input with 3.3 V logic levels
- Compact 44 x 43 mm board weighing just 9 g
- UFL antenna connector with included 15 cm RF cable
Ideal For
- Robotics engineers building autonomous navigation systems
- Drone and UAV developers needing precise position hold
- Surveying and mapping enthusiasts working with RTK corrections
- Makers building base or rover GNSS stations
- Precision agriculture and ground vehicle projects
Buying Tip
Confirm you have a 3.3 V logic controller and an external GNSS antenna, and plan a correction source if you need the 1 cm RTK accuracy.
Elecvora expert review
Our verdict
A well-sized ZED-F9P board that gives you multi-band, multi-constellation RTK positioning in a package light enough for small platforms. It is a solid foundation for anyone building precision navigation, provided you supply an antenna and correction source.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- ZED-F9P receiver with centimeter-level RTK capability
- Tracks four constellations on L1C/A and L2C
- High 25 Hz PVT and 20 Hz RTK update rates
- Compact 9 g board with flexible 3.3-5 V input
- UFL connector and RF cable included
Cons
- Antenna and RTK correction source are not included
- Logic is 3.3 V only, so level shifting may be needed
- Current draw rises with more active constellations
Best for
Robotics, drone and surveying projects needing precise RTK positioning
Not ideal for
Simple GPS tracking where meter-level accuracy is enough
Specifications
| Item Type | GPS-RTK Board |
|---|---|
| Positioning accuracy | ~2.5m (standard), ~0.01m (RTK) |
| GNSS | u-blox ZED-F9P |
| GNSS Band | L1C/A, L2C |
| Supported systems | GPS, GLONASS, Galileo, BeiDou |
| Operating Voltage (V) | 3.3 – 5 |
| Logic level | 3.3V |
| Current consumption | 68 – 130 |
| Max Navigation Rate | 25Hz (PVT), 20Hz (RTK) |
| Length (mm) | 44 |
| Width (mm) | 43 |
| Weight (g) | 09 |
| Shipping Weight | 0.023 kg |
| Shipping Dimensions | 9 × 6 × 2 cm |
What's in the box
- 1 x SmartElex GPS-RTK Board UFL - ZED-F9P-04B
- 1 x RF cable assembly, 15 cm
- 1 x Antenna connector
- 3 x Header pin
Frequently Asked Questions
Does this board provide centimeter accuracy out of the box?
Which satellite systems does it support?
What voltage does it need?
Is an antenna included?
How fast can it update position?
How much current does it draw?
Overview
The SmartElex GPS-RTK Board UFL is a high-precision GNSS receiver built on the u-blox ZED-F9P module. It is designed for projects that need more than ordinary GPS accuracy: standalone positioning is around 2.5 m, while applying RTK corrections brings that down to roughly 0.01 m. The board receives both L1C/A and L2C bands and tracks GPS, GLONASS, Galileo and BeiDou simultaneously, which helps maintain a stable fix in challenging environments.
Measuring 44 x 43 mm and weighing only 9 g, the board fits easily into compact builds. It accepts a 3.3-5 V supply while all logic runs at 3.3 V, and the UFL connector pairs with the included RF cable for an external antenna.
Key Features
- ZED-F9P receiver: multi-band GNSS engine with RTK support
- Four constellations: GPS, GLONASS, Galileo and BeiDou
- Dual-band tracking: L1C/A and L2C reception
- High update rates: up to 25 Hz PVT, 20 Hz RTK and 25 Hz raw
- Flexible power: 3.3-5 V input, 3.3 V logic, 68-130 mA draw
- Compact and light: 44 x 43 mm, 9 g
Specifications Explained
Positioning accuracy is the headline figure. The ~2.5 m figure is what you get from a standard autonomous fix. The ~0.01 m figure applies only when RTK correction data is available, so a base station or correction service is required to reach centimeter level.
Navigation rate determines how often position is updated. 25 Hz PVT suits fast-moving platforms, while 20 Hz RTK is the ceiling when corrections are in use. Higher rates mean smoother tracking in dynamic applications.
Power and logic are kept separate: the board tolerates 3.3-5 V on the supply, but signal lines are 3.3 V logic, so check your controller's levels before connecting. Current draw varies between 68 mA and 130 mA depending on active constellations and tracking state.
Compatibility and Requirements
The board works with 3.3 V logic controllers and accepts a 3.3-5 V supply. An external GNSS antenna is required and connects through the UFL port; the supplied 15 cm RF cable and antenna connector help with routing. RTK accuracy depends on a correction source such as a base station or correction stream, which is not included.
Typical Uses
- Robotics and autonomous navigation
- Drone and UAV positioning
- Surveying and mapping projects
- Precision agriculture and ground vehicles
- Base or rover station setups
What's in the Box
- 1 x SmartElex GPS-RTK Board UFL - ZED-F9P-04B
- 1 x RF cable assembly, 15 cm
- 1 x Antenna connector
- 3 x Header pin
Quick specs
- Item Type
- GPS-RTK Board
- Positioning accuracy
- ~2.5m (standard), ~0.01m (RTK)
- GNSS
- u-blox ZED-F9P
- GNSS Band
- L1C/A, L2C
- Supported systems
- GPS, GLONASS, Galileo, BeiDou
- Operating Voltage (V)
- 3.3 – 5



















