
1 / 2 · Click to enlarge
At a glance
Made by WAVESHARE, this servo motor drivers is a good fit for makers, students and electronics hobbyists. Main specs: controller ESP32; power port XT60, DC5525; power supply voltage (v) DDSM115: 12-24V DC, DDSM210: 9~28V DC. Check that your power source supplies DDSM115: 12-24V DC, DDSM210: 9~28V DC before connecting it.
Key Highlights
- Controller: ESP32
- Power Port: XT60, DC5525
- Power Supply Voltage (V): DDSM115: 12-24V DC, DDSM210: 9~28V DC
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Controller | ESP32 |
|---|---|
| Power Port | XT60, DC5525 |
| Power Supply Voltage (V) | DDSM115: 12-24V DC, DDSM210: 9~28V DC |
| Communication Mode | Type-C × 2, UART |
| Wireless Configuration | 2.4G WiFi |
| Mounting Hole Diameter (mm) | 3 |
| Mounting Hole PCD (mm) | 58×49 mm |
| PCB Size ( L x W ) mm | 85×57 |
| Shipping Weight | 0.125 kg |
| Shipping Dimensions | 17 × 11 × 3 cm |
Overview
The Waveshare Direct Drive Servo Motor Driver Board, Integrates ESP32 and Control Circuit, 2.4G WiFi Support, Suitable for DDSM Series Hub Motors, ESP Now Support, made by WAVESHARE, is listed in our servo motor drivers range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Controller: ESP32
- Power Port: XT60, DC5525 (confirm your cable or board uses the same connector)
- Power Supply Voltage (V): DDSM115: 12-24V DC, DDSM210: 9~28V DC (match this to your power supply; too high a voltage can damage the part)
- Communication Mode: Type-C × 2, UART
- Wireless Configuration: 2.4G WiFi (2.4 GHz reaches further, 5 GHz is faster at short range)
- Mounting Hole Diameter (mm): 3
- Mounting Hole PCD (mm): 58×49 mm
- PCB Size ( L x W ) mm: 85×57 (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
Features:
- Suitable for DDSM series hub motors such as DDSM115 and DDSM210, onboard 4-ch DDSM115 motor interfaces and 4-ch DDSM210 motor interfaces
- Provides DDSM hub motor control demo and SDK, easy to use
- Supports multiple wired and wireless communication modes, supports JSON command interaction for easier control
- Supports connecting to Raspberry Pi, powering the Pi via integrated 5V buck regulator circuit and communicating through GPIO UART interface, neat cable management
- Integrated WEB application for controlling and setting the DDSM hub motors, more convenient for debugging
- Supports controlling the DDSM hub motors directly via onboard Type-C port
Package Includes:
- DDSM Driver HAT (A) x1
- 2×20 pin header x1
- USB Type-A to Type-C cable ×1
- Screws pack ×1
Quick specs
- Controller
- ESP32
- Power Port
- XT60, DC5525
- Power Supply Voltage (V)
- DDSM115: 12-24V DC, DDSM210: 9~28V DC
- Communication Mode
- Type-C × 2, UART
- Wireless Configuration
- 2.4G WiFi
- Mounting Hole Diameter (mm)
- 3



















