
1 / 3 · Click to enlarge
AI Summary
A 16-channel servo driver board that mounts directly onto Raspberry Pi Pico boards and delivers precise 16-bit PWM control for up to 16 servos. Its onboard 5V regulator and VIN battery input support up to 8A of output current for larger motion projects.
Key Highlights
- 16 servo and PWM output channels on one compact board
- High-precision 16-bit PWM resolution for smooth positioning
- Direct mounting on Raspberry Pi Pico series headers
- Onboard 5V regulator with up to 8A output from VIN
- Standard servo connectors for common servo models
- Unused Pico GPIO pins exposed for project expansion
Ideal For
- Robotics builders making multi-joint arms
- Hobbyists building hexapod walkers
- Makers adding pan-tilt motion to camera rigs
- Students learning Pico-based motion control
- Animatronics and prop builders needing many servos
Buying Tip
Check your servo supply voltage and current draw before choosing between Pico power and the VIN battery terminal, since the 8A regulator output is shared across all connected servos.
Elecvora expert review
Our verdict
A tidy, purpose-built expansion board that removes most of the wiring pain from multi-servo Pico projects. The 16-bit resolution and generous regulator headroom make it a sensible foundation for robotics work.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Direct Pico mounting keeps wiring minimal
- 16 channels with fine 16-bit PWM control
- Onboard regulator supports up to 8A from VIN
- Unused GPIO pins stay available for expansion
- C/C++ and MicroPython resources provided
Cons
- Servos and battery are not included
- High-current builds need a separate VIN supply
- Servo rail is fixed at 5V
Best for
Pico users building multi-servo robots and motion rigs
Not ideal for
Projects needing servo voltages other than 5V on the rail
Specifications
| Shipping Weight | 0.04 kg |
|---|---|
| Shipping Dimensions | 8 × 7 × 2 cm |
What's in the box
- 1 x Waveshare Servo Driver Module for Raspberry Pi Pico, 16-ch Outputs, 16-bit Resolution
Frequently Asked Questions
How many servos can this board control?
Which boards does it work with?
How is the board powered?
How much current can it supply to servos?
What is included in the package?
Can I still use the other Pico pins?
Overview
The Waveshare Servo Driver Module is a compact expansion board that turns a Raspberry Pi Pico series board into a 16-channel servo controller. Rather than driving each servo from individual GPIO pins, the module handles the PWM generation for up to 16 outputs at 16-bit resolution, giving you fine positional control across every connected servo.
Because the board uses a standard Pico header, it attaches directly to the Pico without a tangle of jumper wires. Standard servo interfaces are provided for each channel, and unused Pico pins remain accessible so you can keep adding sensors, displays or other peripherals.
Key Features
- 16 channels: control up to 16 servos or PWM devices from a single Pico.
- 16-bit resolution: high-precision PWM for smooth, repeatable movement.
- Onboard 5V regulator: supplies servo power with up to 8A output current when powered from the VIN battery terminal.
- Flexible power: run the board from the Pico directly or from a VIN battery input.
- Expansion ready: unused Pico GPIO pins are exposed for additional hardware.
- Development support: examples and resources for Raspberry Pi Pico C/C++ and MicroPython.
Specifications Explained
The 16 output channels determine how many servos you can drive at once, which suits multi-joint robots and pan-tilt assemblies. The 16-bit PWM resolution means each channel can be set to a very fine step, so servo positions can be adjusted smoothly instead of in coarse jumps.
Power is the detail to plan around. The board accepts 5V from the Pico, or 6 to 12V through the VIN battery input terminal, and its onboard regulator can output up to 8A. Logic runs at 3.3V while the servo rail sits at 5V, keeping the Pico side and the servo side appropriately separated. The board measures 65 x 56mm, weighs 28g and uses 3.0mm mounting holes.
Compatibility and Requirements
The module is designed for Raspberry Pi Pico series boards and uses a standard servo interface for common servo models. Control is handled over GPIO, and development resources are available for Pico C/C++ and MicroPython. A suitable power source is required, either through the Pico or via the VIN battery input terminal.
Typical Uses
- Robotic arms with multiple joints
- Hexapod and multi-legged walking robots
- Pan-tilt camera or sensor mounts
- Animatronics and motion-control builds
- General servo and PWM experimentation with Pico
What's in the Box
1 x Waveshare Servo Driver Module for Raspberry Pi Pico, 16-ch Outputs, 16-bit Resolution.





















