Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by Adafruit, this adafruit module is a good fit for makers, students and electronics hobbyists. Main specs: voltage rating (v) 3.3V power regulation and level shifting; i2c address Uses I2C address 0x18; dimensions (l x w x h) mm 17.8mm x 16.7mm x 7.5mm / 0.7" x 0.7" x 0.3". Check that your power source supplies 3.3V power regulation and level shifting before connecting it.

Key Highlights

  • Voltage Rating (V): 3.3V power regulation and level shifting
  • I2C Address: Uses I2C address 0x18
  • Dimensions (L x W x H) mm: 17.8mm x 16.7mm x 7.5mm / 0.7" x 0.7" x 0.3"

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Pressure Range (MPa)0 to 25 PSI
ADC / DAC24 bit ADC
Voltage Rating (V)3.3V power regulation and level shifting
I2C AddressUses I2C address 0x18
Dimensions (L x W x H) mm17.8mm x 16.7mm x 7.5mm / 0.7" x 0.7" x 0.3"
Weight (g)1.1g / 0.0oz
Additional Specs.The port is made of stainless steel and is 3.7mm long and 2.5mm diameter
Shipping Weight0.03 kg
Shipping Dimensions5 × 3 × 2 cm

Overview

The Adafruit MPRLS 0–25 PSI Ported Pressure Sensor Breakout RoHS, made by Adafruit, is listed in our adafruit module range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Pressure Range (MPa): 0 to 25 PSI (quoted range is usually line-of-sight; walls and interference shorten it)
  • ADC / DAC: 24 bit ADC
  • Voltage Rating (V): 3.3V power regulation and level shifting (match this to your power supply; too high a voltage can damage the part)
  • I2C Address: Uses I2C address 0x18
  • Dimensions (L x W x H) mm: 17.8mm x 16.7mm x 7.5mm / 0.7" x 0.7" x 0.3" (measure your mounting space before ordering)
  • Weight (g): 1.1g / 0.0oz (important for drones, RC models and anything you carry)
  • Additional Specs.: The port is made of stainless steel and is 3.7mm long and 2.5mm diameter (confirm your cable or board uses the same connector)
  • Shipping Weight: 0.03 kg (important for drones, RC models and anything you carry)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

We stock a few barometric pressure sensors, great for altitude and weather measurements. This pressure sensor is special because it comes with a metal port! Unlike other pressure sensors, you can easily attach a tube to it, to measure air pressure inside a close space. In particular we think this would be a great sensor for use with making DIY assistive tech "Sip & Puff" interfaces, or measuring the pressure within a vacuum chamber or other pressurized container. Unlike most ported pressure sensors, this one uses I2C, it's really easy to use with any microcontroller. Inside is a silicone-gel covered pressure sensing gauge with a pre-calibrated and compensated 24 bit ADC. We have example code and libraries for Arduino or CircuitPython/Python. You can measure absolute pressure 0 to 25 PSI, which is a great range since ambient pressure here on Earth is about 14.5 PSI. The port is made of stainless steel and is 3.7mm long and 2.5mm diameter. It doesn't come with tubing so be sure to purchase some tubing to attach to the port. We've placed this nice sensor on a breakout board with 3.3V power regulation and level shifting so you can use it with any kind of microcontroller or microcomputer, from an Arduino compatible to Raspberry Pi

Features: 

  1. Very small size
  2. You can use with Arduino
  3. Power Pins: 3-5V
  4. I2C Logic pins: SCL - I2C clock pin, connect to your microcontrollers I2C clock line. SDA - I2C data pin, connect to your microcontrollers I2C data line.
  5. You can program with python

Packages Includes:

1 x Adafruit MPRLS Ported Pressure Sensor Breakout - 0 to 25 PSI RoHS Compliant

Quick specs

Pressure Range (MPa)
0 to 25 PSI
ADC / DAC
24 bit ADC
Voltage Rating (V)
3.3V power regulation and level shifting
I2C Address
Uses I2C address 0x18
Dimensions (L x W x H) mm
17.8mm x 16.7mm x 7.5mm / 0.7" x 0.7" x 0.3"
Weight (g)
1.1g / 0.0oz
See all specifications