Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by Cytron, this cytron motor drivers is a good fit for everyday home and hobby use. Main specs: item type Motor Driver; model series MD Series; current rating (a) 25. Check that your power source supplies 7 to 58 before connecting it.

Key Highlights

  • Item Type: Motor Driver
  • Model Series: MD Series
  • Current Rating (A): 25

Ideal For

  • Robots and moving models
  • Automation projects
  • Replacement for a worn motor

Buying Tip

Check the size, weight and connector against your model, and keep spare props or parts for the first flights.

Specifications

Item TypeMotor Driver
Model SeriesMD Series
Voltage Rating (V)7 to 58
Current Rating (A)25
Supply Voltage7 - 58 V.
Continuous Discharge Current (A)25 A
Peak Current (A)60 A.
Potentiometer Input Voltage0 ~ 5 V, Analog
Logic Voltage (V)Low - 0 ~ 0.8V. High - 3 ~ 30V.
PWM Input Frequency40 KHz.
Output Frequency16 KHz
Shipping Weight0.1 kg
Shipping Dimensions10 × 6 × 5 cm

Overview

The Cytron 25A 7V-58V DC motor driver with Switch and Potentiometer Control (MD25HV POT), made by Cytron, is listed in our cytron motor drivers range and suits everyday home and hobby use. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Motor Driver
  • Model Series: MD Series
  • Voltage Rating (V): 7 to 58 (match this to your power supply; too high a voltage can damage the part)
  • Current Rating (A): 25 (your supply must deliver at least this much current)
  • Supply Voltage: 7 - 58 V. (match this to your power supply; too high a voltage can damage the part)
  • Continuous Discharge Current (A): 25 A (your supply must deliver at least this much current)
  • Peak Current (A): 60 A. (your supply must deliver at least this much current)
  • Potentiometer Input Voltage: 0 ~ 5 V, Analog (match this to your power supply; too high a voltage can damage the part)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The Cytron 25A 7V-58V DC motor driver with Switch and Potentiometer Control (MD25HV POT) is a high voltage single channel bidirectional motor driver for DC motor from 7V to 58V. With discrete NMOS H-Bridge design, this motor driver is able to support 25A continuously without an additional heatsink.

The onboard test buttons and motor output LEDs allow the functional test of the motor driver in a quick; and convenient way without hooking up the host controller. Buck regulator which produces 5V output is also available to power the host controller. This is especially useful for high voltage application where no additional power source nor high voltage buck regulator is needed.

MD25HV can be controlled with PWM and DIR inputs. With input logic voltage range from 1.8V to 30V, it’s compatible with a wide variety of host controller (e.g. Arduino, Raspberry Pi, PLC). If you prefer to control the motor directly without any programming, this motor driver can be controlled from a potentiometer (speed) and a switch (direction) too.

Note: Power input does not have reverse-voltage protection. Connecting the battery in reverse polarity will damage the motor driver instantaneously. Cytron 25 A DC Motor Driver Applications:
  1. Automated Guided Vehicle (AGV).
  2. Mobile Robot.
  3. Automation Machine.
  4. Electric Vehicle.

 

Features: 

  1. Bidirectional control for one brushed DC motor.
  2. Maximum Motor Current: 25A continuous, 60A peak
  3. 5V output for the host controller (250mA max)
  4. Buttons for quick testing.
  5. LEDs for motor output state.
  6. Dual Input Mode: PWM/DIR or Potentiometer/Switch Input.
  7. PWM/DIR Inputs are compatible with 1.8V, 3.3V, 5V, 12V and 24V logic (Arduino, Raspberry Pi, PLC, etc).
  8. PWM frequency up to 40kHz (Output frequency is fixed at 16kHz).
  9. Overcurrent protection with active current limiting.
  10. Temperature protection.
  11. Undervoltage shutdown.

Package Includes:

1 x Cytron 25A 7V-58V DC motor driver (MD25HV POT).

1 x Rocker switch with connector.

1x 10K Potentiometer with connector.

1 x set of Nylon standoff/Spacers.


Code: 

Library: Click Here!

Quick specs

Item Type
Motor Driver
Model Series
MD Series
Voltage Rating (V)
7 to 58
Current Rating (A)
25
Supply Voltage
7 - 58 V.
Continuous Discharge Current (A)
25 A
See all specifications