
1 / 7 · Click to enlarge
At a glance
Made by Cytron, this cytron motor drivers is a good fit for everyday home and hobby use. Main specs: item type Controller/Development Board; model series Maker Series; operating voltage (vdc) DC Jack: 7V-18V, USB: USB type-C 5V. Check that your power source supplies 5 to 18 before connecting it.
Key Highlights
- Item Type: Controller/Development Board
- Model Series: Maker Series
- Operating Voltage (VDC): DC Jack: 7V-18V, USB: USB type-C 5V
Ideal For
- Robots and moving models
- Automation projects
- Replacement for a worn motor
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Item Type | Controller/Development Board |
|---|---|
| Model Series | Maker Series |
| Voltage Rating (V) | 5 to 18 |
| Operating Voltage (VDC) | DC Jack: 7V-18V, USB: USB type-C 5V |
| On Board Ports | 1 x Ethernet, 1 x HDMI, 4 x USB 2.0, 1 x CSI, 1 x DSI, 1 x 3.5 mm Audio Jack |
| Length (mm) | 110 |
| Width (mm) | 104 |
| Weight (g) | 60 |
| Shipping Weight | 0.015 kg |
| Shipping Dimensions | 6 × 4 × 2 cm |
Overview
The Cytron CM4 Maker Board, made by Cytron, is listed in our cytron motor drivers range and suits everyday home and hobby use. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Item Type: Controller/Development Board
- Model Series: Maker Series
- Voltage Rating (V): 5 to 18 (match this to your power supply; too high a voltage can damage the part)
- Operating Voltage (VDC): DC Jack: 7V-18V, USB: USB type-C 5V (match this to your power supply; too high a voltage can damage the part)
- On Board Ports: 1 x Ethernet, 1 x HDMI, 4 x USB 2.0, 1 x CSI, 1 x DSI, 1 x 3.5 mm Audio Jack (confirm your cable or board uses the same connector)
- Length (mm): 110 (measure your mounting space before ordering)
- Width (mm): 104 (measure your mounting space before ordering)
- Weight (g): 60 (important for drones, RC models and anything you carry)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
Benefits of CM4 Maker Board, it comes with a wide range of input voltage and can be powered up through DC Jack (7V-18V) or USB-C (5V). Turning the device ON and OFF can be easily done through a power button instead of typing ‘power off’ on the terminal or finding a shutdown button on the start menu.

It comes with multiple ways to boot up the Raspberry Pi OS. Choose what is convenient for you, 1) Micro SD Card, 2) NVME SSD (Bigger Storage, more reliable), and 3) eMMC (on the CM4).
Moreover, the feature you can find on the standard Raspberry Pi is also available, such as Gb Ethernet, 4x USB2.0, HDMI, CSI Port, DSI Port, 3.5mm Audio Out, and compatibility with RPI HAT.
In addition, the CM4 Maker Board is equipped with PCF85063A RTC, which could provide a real-time clock for applications without an internet connection.
For those Makers, this board also comes with Maker’s Features: the Grove Ports, Maker Port, 10x GPIO LEDs, Piezo Buzzer with Mute Switch, and 3x Push Buttons.
Features:
- Wide range of Input Voltage
- DC Jack: 7V-18V
- USB: USB type-C 5V
- Power Button
- Can Safely Shutdown CM4 Board
- Turn ON the CM4 without Power Cycle
- Micro-SD card Slot
- Supports 2230 & 2242 NVME SSD Slot
- Bigger Storage
- Bootable
- Storage Expansion
- Supports Other M.2 PCIE Modules
Package Includes:
1 x CM4 Maker Board Only
4 x Silicone BumperQuick specs
- Item Type
- Controller/Development Board
- Model Series
- Maker Series
- Voltage Rating (V)
- 5 to 18
- Operating Voltage (VDC)
- DC Jack: 7V-18V, USB: USB type-C 5V
- On Board Ports
- 1 x Ethernet, 1 x HDMI, 4 x USB 2.0, 1 x CSI, 1 x DSI, 1 x 3.5 mm Audio Jack
- Length (mm)
- 110



















