Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by Cytron, this cytron motor drivers is a good fit for everyday home and hobby use. Main specs: item type Driver HAT; model series MDDS Series; current rating (a) 30. Check that your power source supplies 6 to 24 before connecting it.

Key Highlights

  • Item Type: Driver HAT
  • Model Series: MDDS Series
  • Current Rating (A): 30

Ideal For

  • Robots and moving models
  • Automation projects
  • Replacement for a worn motor

Buying Tip

Read the full specifications and the package contents list below to make sure it does what you need.

Specifications

Item TypeDriver HAT
Model SeriesMDDS Series
Voltage Rating (V)6 to 24
Current Rating (A)30
Peak Current (A)30
Continuous Discharge Current (A)10
Operating ModePWM (Lock-Antiphase and Sign-Magnitude): Yes, UART: No, Analog:No, RC Servo Signal: No
No. of Channels2
Battery Protect. Mode (Y/N)No
Overcurrent Protect. (Y/N)Yes
Thermal Protection (Y/N)Yes
LED IndicatorYes
Test/Manual Button (Y/N)Yes
Cooling FanNo
Arduino Shield (Y/N)No, can be used with Wire connection
Polarity Protection (Y/N)NO
Dimensions (L x W x H) mm68 x 59 x 20
Weight (g)112
Shipping Weight0.04 kg
Shipping Dimensions10 × 7 × 3 cm

Overview

The Cytron Driver HAT-MDD10, made by Cytron, is listed in our cytron motor drivers range and suits everyday home and hobby use. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Driver HAT
  • Model Series: MDDS Series
  • Voltage Rating (V): 6 to 24 (match this to your power supply; too high a voltage can damage the part)
  • Current Rating (A): 30 (your supply must deliver at least this much current)
  • Peak Current (A): 30 (your supply must deliver at least this much current)
  • Continuous Discharge Current (A): 10 (your supply must deliver at least this much current)
  • Operating Mode: PWM (Lock-Antiphase and Sign-Magnitude): Yes, UART: No, Analog:No, RC Servo Signal: No
  • No. of Channels: 2

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The Cytron Driver HAT-MDD10 is the latest motor driver designed for Raspberry Pi, the HAT-MDD10 is designed to drive two high current brushed DC motor up to 10A continuously by using Raspberry Pi as the controller. It offers signed-magnitude PWM control of direction and speed. Besides, using full solid state components which result in a faster response time and eliminate the wear and tear of the mechanical relay. Not to forget there is a current limiting sensor and auto cut set at 30A peak to protect the motor driver from overcurrent. Looking for high current motor driver for Raspberry Pi? Here you go at dual channels 10A continuous motor driver for Raspberry Pi.

Features :

  1. Bi-directional control for two brushed DC motor.
  2. Support motor voltage ranges from 6VDC to 24VDC.
  3. Onboard the test button for manual control of the motor.
  4. Every channel output built with LED indicator.
  5. Maximum current up to 10A continuous (without a heatsink at 25℃) and 30A peak (10 seconds).
  6. Current limiting at 30A.
  7. Raspberry Pi compatible connector.
  8. Solid state components provide faster response time.
  9. Fully NMOS H-Bridge for better efficiency and no heat sink is required.
  10. Speed control PWM frequency up to 20KHz (Actual output frequency is the same as the input frequency from Raspberry Pi).
  11. Support sign-magnitude PWM operation.
  12. Support TTL PWM from the microcontroller, not PWM from RC receiver.

Package Includes :

1 x Cytron Driver HAT-MDD10

Quick specs

Item Type
Driver HAT
Model Series
MDDS Series
Voltage Rating (V)
6 to 24
Current Rating (A)
30
Peak Current (A)
30
Continuous Discharge Current (A)
10
See all specifications