
1 / 4 · Click to enlarge
At a glance
Made by Cytron, this cytron motor drivers is a good fit for makers, students and electronics hobbyists. Main specs: item type Controller/Development Board; model series Maker Series; voltage rating (v) 3.6 to 6. Check that your power source supplies 3.6 to 6 before connecting it.
Key Highlights
- Item Type: Controller/Development Board
- Model Series: Maker Series
- Voltage Rating (V): 3.6 to 6
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Read the full specifications and the package contents list below to make sure it does what you need.
Specifications
| Item Type | Controller/Development Board |
|---|---|
| Model Series | Maker Series |
| Voltage Rating (V) | 3.6 to 6 |
| Current Rating (A) | 1.5 |
| Model No. / Name | Cytron Maker Pi RP2040 |
| Input Voltage (VAC) | 3.6-6 |
| Max Current (A) | 1.5 |
| Max Output Current (mA) | 300 |
| Max. Clock Frequency (MHz) | 133 |
| USB | Micro USB |
| Operating Temperature (°C) | -20 to 85 |
| Length (mm) | 87.67 |
| Width (mm) | 63.8 |
| Shipping Weight | 0.069 kg |
| Shipping Dimensions | 10 × 7 × 3 cm |
Overview
The Cytron Maker Pi RP2040 : Simplifying Robotics with Raspberry Pi RP2040, made by Cytron, is listed in our cytron motor drivers range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Item Type: Controller/Development Board
- Model Series: Maker Series
- Voltage Rating (V): 3.6 to 6 (match this to your power supply; too high a voltage can damage the part)
- Current Rating (A): 1.5 (your supply must deliver at least this much current)
- Model No. / Name: Cytron Maker Pi RP2040
- Input Voltage (VAC): 3.6-6 (match this to your power supply; too high a voltage can damage the part)
- Max Current (A): 1.5 (your supply must deliver at least this much current)
- Max Output Current (mA): 300 (your supply must deliver at least this much current)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
- Powered by Raspberry Pi RP2040
- Dual-core Arm Cortex-M0+ processor
- 264KB internal RAM
- 2MB of Flash memory
- the exact same specifications with Raspberry Pi Pico
- Robot controller board
- 4 x Servo motors
- 2 x DC motors with quick test buttons
- Versatile power circuit
- Automatic power selection: USB 5V, LiPo (1-cell), or Vin (3.6-6V)
- Built-in 1-cell LiPo/Li-Ion charger (over-charged & over-discharged protection)
- Power on/off switch
- 13 x Status indicator LEDs for GPIO pins
- 1 x Piezo buzzer with mute switch
- 2 x Pushbutton
- 2 x RGB NeoPixel LED
- 7 x Grove ports (flexible I/O options: digital, analogue, I2C, SPI, UART...)
- Preloaded with CircuitPython by default
- Mounting holes
- 4 x 4.8mm mounting hole (LEGO-compatible)
- 6 x M3 screw hole
Features:
- Dual ARM Cortex-M0+ @ 133MHz
- 264kB on-chip SRAM in six independent banks
- Support for up to 16MB of off-chip Flash memory via dedicated QSPI bus
- DMA controller
- Fully-connected AHB crossbar
- Interpolator and integer divider peripherals
- On-chip programmable LDO to generate core voltage
- 2 on-chip PLLs to generate USB and core clocks
- 30 GPIO pins, 4 of which can be used as analogue inputs
- Peripherals
- 2 UARTs
- 2 SPI controllers
- 2 I2C controllers
- 16 PWM channels
- USB 1.1 controller and PHY, with host and device support
- 8 PIO state machines
Package Includes:
- 1x Maker Pi RP2040
- 4x Grove to Female Header Cable
- 1x Mini Screwdriver
- 1x Silicone Rubber Feet (Pack of 4)
Quick specs
- Item Type
- Controller/Development Board
- Model Series
- Maker Series
- Voltage Rating (V)
- 3.6 to 6
- Current Rating (A)
- 1.5
- Model No. / Name
- Cytron Maker Pi RP2040
- Input Voltage (VAC)
- 3.6-6



















