Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by Cytron, this cytron motor drivers is a good fit for makers, students and electronics hobbyists. Main specs: item type Controller/Development Board; model series Maker Series; voltage rating (v) 3.6 to 6. Check that your power source supplies 3.6 to 6 before connecting it.

Key Highlights

  • Item Type: Controller/Development Board
  • Model Series: Maker Series
  • Voltage Rating (V): 3.6 to 6

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Read the full specifications and the package contents list below to make sure it does what you need.

Specifications

Item TypeController/Development Board
Model SeriesMaker Series
Voltage Rating (V)3.6 to 6
Current Rating (A)1
Motor Input Voltage (V)3.6 - 6
Supply Voltage2.0 to 3.6
Output Voltage2.62 to 3.3
Analog Inputs(V)3.3
Operating Temperature (°C)-20 to 85
Shipping Weight0.055 kg
Shipping Dimensions8 × 7 × 3 cm

Overview

The Cytron Maker UNO RP2040 : Simplifying Robotics with Raspberry Pi RP2040, made by Cytron, is listed in our cytron motor drivers range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Controller/Development Board
  • Model Series: Maker Series
  • Voltage Rating (V): 3.6 to 6 (match this to your power supply; too high a voltage can damage the part)
  • Current Rating (A): 1 (your supply must deliver at least this much current)
  • Motor Input Voltage (V): 3.6 - 6 (match this to your power supply; too high a voltage can damage the part)
  • Supply Voltage: 2.0 to 3.6 (match this to your power supply; too high a voltage can damage the part)
  • Output Voltage: 2.62 to 3.3 (match this to your power supply; too high a voltage can damage the part)
  • Analog Inputs(V): 3.3

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

Introducing the Maker Uno RP2040, a revolutionary board combining Uno form factor with Raspberry Pi RP2040 chip. Boasting dual-core Arm Cortex-M0+, 264KB RAM, 2MB flash, and 16 PWM channels, it supports Arduino, CircuitPython, and MicroPython. With onboard LEDs, push buttons, and Grove ports for plug-and-play simplicity, it's perfect for projects and learning. Seamlessly integrate up to 4 servos and power via USB-C or LiPo/Li-ion battery.

Features:

  1. Raspberry Pi RP2040 chip with dual-core Arm Cortex-M0+.
  2. Versatile support for Arduino, CircuitPython, and MicroPython.
  3. Onboard LEDs, push buttons, and Grove ports for easy troubleshooting and connections.
  4. Dedicated servo port for seamless integration of up to 4 servo motors.
  5. Dual power options: USB-C or LiPo/Li-ion battery with built-in charging circuit.
  6. Arduino/Maker Uno form factor for familiar usability and convenience.
  7. Total +3V3 Output Current: Up to 500mA
  8. Total +5V Output Current: Up to 600mA
  9. Vservo (Only USB Connected): VUSB - 0.4V
  10. Vservo (Only LiPo/Li-Ion Connected): *VBAT
  11. Vservo (USB and LiPo/Li-Ion Connected): VUSB - 0.4V
  12. USB VID & PID (CircuitPython & Arduino Core): VID: 0x2E8A, PID: 0x1071

Package Includes:

1x Maker Uno RP2040

1x Silicone Rubber Feet (Pack of 4)

4x Grove to Female Header Cable

Quick specs

Item Type
Controller/Development Board
Model Series
Maker Series
Voltage Rating (V)
3.6 to 6
Current Rating (A)
1
Motor Input Voltage (V)
3.6 - 6
Supply Voltage
2.0 to 3.6
See all specifications