Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by Cytron, this cytron motor drivers is a good fit for everyday home and hobby use. Main specs: item type Motor Driver; model series MD Series; model no. / name Cytron MD13S. Check that your power source supplies 6 to 30 before connecting it.

Key Highlights

  • Item Type: Motor Driver
  • Model Series: MD Series
  • Model No. / Name: Cytron MD13S

Ideal For

  • Robots and moving models
  • Automation projects
  • Replacement for a worn motor

Buying Tip

Check the size, weight and connector against your model, and keep spare props or parts for the first flights.

Specifications

Item TypeMotor Driver
Model SeriesMD Series
Voltage Rating (V)6 to 30
Current Rating (A)13 to 30
Model No. / NameCytron MD13S
Operating Voltage (VDC)6 ~ 30
Peak Current (A)30
Continuous Discharge Current (A)13
Operating ModePWM (Lock-Antiphase and Sign-Magnitude): Yes, UART: No, Analog:No, RC Servo Signal: No
No. of Channels1
LED IndicatorYes
Test/Manual Button (Y/N)Yes
Cooling FanNo
Arduino Shield (Y/N)No, can be used with Wire connection
Speed Control (Y/N)Yes
Dimensions (L x W x H) mm62 x 33 x 12
Weight (g)103
Shipping Weight0.13 kg
Shipping Dimensions10 × 6 × 5 cm

Overview

The MD13S 13Amp DC Motor Driver – GROVE Compatible, made by Cytron, is listed in our cytron motor drivers range and suits everyday home and hobby use. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Motor Driver
  • Model Series: MD Series
  • Voltage Rating (V): 6 to 30 (match this to your power supply; too high a voltage can damage the part)
  • Current Rating (A): 13 to 30 (your supply must deliver at least this much current)
  • Model No. / Name: Cytron MD13S
  • Operating Voltage (VDC): 6 ~ 30 (match this to your power supply; too high a voltage can damage the part)
  • Peak Current (A): 30 (your supply must deliver at least this much current)
  • Continuous Discharge Current (A): 13 (your supply must deliver at least this much current)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

MD13S 13Amp DC Motor Driver has great improvement in current protection which MD10C does not have. With new circuit and design, MD13S is able to output current to 30A max. And the continuous current is at 13A (in room temperature of 25°C).

Brush motor is the most used motor worldwide because of the ease of operation. Just supply two terminals of brush motor with DC voltage, it will start rotating! Yet, you need a good motor driver to control the speed and direction of a microcontroller. MD10C is a great motor driver and now it is already in Revision 3.

Anyway, we would like to introduce MD13S where the S stands for SMD (Surface Mount Device).

Oh, did I mention? MD13S is smaller than MD10C.


Features :

  1. Bi-directional control for 1 brushed DC motor.
  2. Support motor voltage ranges from  6V to 30V
  3. Maximum current up to 13A continuous and 30A peak (10 seconds).
  4. GROVE compatible
  5. 3.3V and 5V logic level input.
  6. Solid state components provide faster response time and eliminate the wear and tear of a mechanical relay.
  7. Fully NMOS H-Bridge for better efficiency and no heat sink is required.
  8. Speed control PWM frequency up to 20KHz (Actual output frequency is the same as input frequency).
  9. Support both locked-antiphase and sign-magnitude PWM operation, NOT RC (Radio Control) PWM.
  10. SMD compatible.

Package Includes :

1 x MD13S 13Amp DC Motor Driver - GROVE Compatible

1 x Grove cable and accessories(as shown in the image)

Quick specs

Item Type
Motor Driver
Model Series
MD Series
Voltage Rating (V)
6 to 30
Current Rating (A)
13 to 30
Model No. / Name
Cytron MD13S
Operating Voltage (VDC)
6 ~ 30
See all specifications