Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by DFRobot, this oled display is a good fit for makers, students and electronics hobbyists. Main specs: display size (inch) 0.91; operating voltage (v) 3.3 to 5; interface I2C. Check that your power source supplies 3.3 to 5 before connecting it.

Key Highlights

  • Display Size (Inch): 0.91
  • Operating Voltage (V): 3.3 to 5
  • Interface: I2C

Ideal For

  • Everyday use

Buying Tip

Read the full specifications and the package contents list below to make sure it does what you need.

Specifications

Display Size (Inch)0.91
Operating Voltage (V)3.3 to 5
InterfaceI2C
Operating Temperature (°C)-30 to 70
Mounting Hole Diameter (mm)2 mm
Length (mm)33
Width (mm)20
Weight (g)2.7
Colorwhite pixels
Bluetooth VersionSupports Bluetooth 5.1 dual mode function
Shipping Weight0.015 kg
Shipping Dimensions9 × 7 × 3 cm

Overview

The DFRobot Fermion: Monochrome 0.91” 128x32 I2C OLED Display (Breakout), made by DFRobot, is listed in our oled display range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Display Size (Inch): 0.91 (measured diagonally; compare with the space you have before ordering)
  • Operating Voltage (V): 3.3 to 5 (match this to your power supply; too high a voltage can damage the part)
  • Interface: I2C (confirm your cable or board uses the same connector)
  • Operating Temperature (°C): -30 to 70
  • Mounting Hole Diameter (mm): 2 mm
  • Length (mm): 33 (measure your mounting space before ordering)
  • Width (mm): 20 (measure your mounting space before ordering)
  • Weight (g): 2.7 (important for drones, RC models and anything you carry)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

This OLED display module uses the SSD1306 drive chip, has 128x32 self-illuminating white pixels, and adopts the back chip-mounting pad design. Small size, the length is 33mm and the width is 20mm. With its small size, simple wiring and low power consumption, it can be applied to many display applications, such as wearable display devices, Mini small game consoles, desktop widgets, etc. The display module adopts a high-contrast, low-power OLED display. Full-screen lighting consumes approximately 25mA (3.3V) 25mA (5V) and full-screen off power consumption: approx. 2mA (3.3V) 2mA (5V). It is compatible with controllers such as Arduino UNO, Leonardo, ESP32/ESP8266, FireBettle-M0 and so on. Internal power-on reset processing, I2C communication methods, so that your welding line will be more convenient and simpler. Note: Turn the pixels off when you are not using the display to prevent the use of some pixels too long to darken them, which will cause the brightness uniformity problem.

Applications:

  1. Thermometer
  2. Desktop weather display
  3. Kitchen weighing machine
  4. Air quality detector
  5. Mini Game consoles
  6. Wearable display

Features:

  1. Self-illuminating OLED display
  2. Controllable pixels and low power consumption
  3. Supports power-on reset
  4. Number of pixels: 128 columns x 32 rows
  5. Drive chip: SSD1306
  6. Brightness: 180 (Typ) cd/m2
  7. Full-screen lighting power: approx. 25mA (3.3V) 25mA (5V)
  8. Full-screen off power consumption: approx. 2mA (3.3V) 2mA (5V)
  9. Operating temperature: -30°C to 70°C
  10. Display area: 22.38 x 5.58 mm / 0.88”x 0.22”

Package Includes:

1 x Monochrome 0.91”128x32 I2C OLED Display

1 x 2.54 chip-mounting pin-4P

Quick specs

Display Size (Inch)
0.91
Operating Voltage (V)
3.3 to 5
Interface
I2C
Operating Temperature (°C)
-30 to 70
Mounting Hole Diameter (mm)
2 mm
Length (mm)
33
See all specifications