
1 / 3 · Click to enlarge
AI Summary
A 0.96-inch 128x64 monochrome OLED breakout with SSD1306 driver, selectable I2C or SPI, and 3.3V to 5V operation. Its self-illuminating white pixels and aluminum frame make it a clear, protected display for compact projects.
Key Highlights
- 128x64 white pixels on a 0.96-inch self-illuminating OLED panel
- SSD1306 driver with I2C default at address 0x3C, switchable to SPI
- Wide 3.3V to 5V operating voltage for mixed logic systems
- Aluminum frame protects the screen and glass edge
- Low power consumption with controllable pixels
- Compact 30 x 30 mm board weighing only 4.2 g
Ideal For
- Makers building wearable display devices
- Arduino and ESP32 enthusiasts adding a compact readout
- Mini game console hobbyists
- Desktop widget and sensor display builders
- Students learning I2C and SPI displays
Buying Tip
Confirm your project's logic voltage and available bus before ordering; the board defaults to I2C at 0x3C, and switching to SPI requires a small resistor change.
Elecvora expert review
Our verdict
A well-built small OLED breakout that covers the essentials: crisp white pixels, selectable I2C or SPI, and wide voltage support. The aluminum frame and low power draw make it a dependable choice for compact projects.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- High-contrast self-illuminating white pixels
- Flexible I2C or SPI interface with default I2C
- 3.3V to 5V compatibility
- Aluminum frame protects the screen
- Very low weight and compact footprint
Cons
- Requires soldering or header installation for wiring
- Switching to SPI needs a resistor change
- Small 0.96-inch size limits displayed information
Best for
Compact embedded projects needing a clear, low-power readout
Not ideal for
Applications requiring a large color display
Specifications
| Display Size (Inch) | 0.96 |
|---|---|
| Operating Voltage (V) | 3.3 to 5V |
| Interface | I2C (in default) / SPI |
| I2C Address | 0x3C |
| Operating Temperature (°C) | -30 to 70 |
| Length (mm) | 30 |
| Width (mm) | 30 |
| Weight (g) | 4.2 |
| Color | white pixels |
| Bluetooth Version | Supports Bluetooth 5.1 dual mode function |
| Shipping Weight | 0.015 kg |
| Shipping Dimensions | 9 × 7 × 3 cm |
What's in the box
- 1 x Monochrome 0.96" 128x64 I2C/SPI OLED Display
- 1 x 2.54 mm chip-mounting pin header, 6P
Frequently Asked Questions
What is the default interface and I2C address?
What voltage does the display require?
Which controllers is it compatible with?
What is included in the package?
How can I prevent uneven pixel brightness over time?
Does the display need a backlight?
Overview
The DFRobot Fermion Monochrome 0.96" 128x64 I2C/SPI OLED Display is a ready-to-wire breakout for adding a small, high-contrast readout to your electronics projects. The panel uses the SSD1306 driver and produces white pixels on a black background without needing a backlight, which keeps the module thin and power-efficient. It comes configured for I2C communication at address 0x3C, and you can move a resistor to switch it to SPI if your project needs a different bus. The board accepts both 3.3V and 5V supplies, so it fits a wide range of controller setups.
Key Features
- 0.96-inch monochrome OLED with 128 columns by 64 rows of white pixels
- SSD1306 drive chip for familiar library support
- I2C default interface at 0x3C, convertible to SPI via resistor change
- Operating voltage from 3.3V to 5V
- Aluminum frame that shields the screen and prevents glass-edge scratches
- Low full-screen current draw, with pixels that can be turned off when idle
Specifications Explained
The 0.96-inch size and 128x64 resolution give you a compact canvas for text, icons, and simple graphics. White pixels on a self-illuminating OLED mean each pixel emits its own light, so contrast stays high even in dim environments. The SSD1306 driver is widely used, which helps when following existing tutorials and wiring guides. I2C needs only two signal lines, simplifying connections; SPI is available if you prefer a faster bus or need to free the I2C pins. The 3.3V to 5V range covers common logic levels. At 30 x 30 mm and 4.2 g, the module adds almost no bulk. It operates from -30 to 70 degrees Celsius. Typical full-screen current is about 24 mA at 3.3V or 5V in I2C mode and about 27 mA in SPI mode, with full-screen off current around 2 mA in I2C and 2.87 mA in SPI.
Compatibility and Requirements
The display is compatible with controllers such as Arduino UNO, Leonardo, ESP32/ESP8266, and FireBeetle-M0. You will need a host controller and a way to connect the six pins, either by soldering or using the included 2.54 mm pin header. The module supports power-on reset internally. No other accessories are required beyond your controller and wiring.
Typical Uses
This display suits wearable display devices, mini game consoles, desktop widgets, thermometers, desktop weather displays, kitchen weighing machines, and air quality detectors. Its small size and low power draw make it a good fit for projects where space and battery life matter.
What's in the Box
- 1 x Monochrome 0.96" 128x64 I2C/SPI OLED Display
- 1 x 2.54 mm chip-mounting pin header, 6P
Quick specs
- Display Size (Inch)
- 0.96
- Operating Voltage (V)
- 3.3 to 5V
- Interface
- I2C (in default) / SPI
- I2C Address
- 0x3C
- Operating Temperature (°C)
- -30 to 70
- Length (mm)
- 30



















