Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by DFRobot, this buck converter is a good fit for everyday home and hobby use. Main specs: input voltage 3.3V~5.5V; interface Gravity I2C; shipping weight 0.022 kg. Check that your power source supplies 3.3V~5.5V before connecting it.

Key Highlights

  • Input Voltage: 3.3V~5.5V
  • Interface: Gravity I2C
  • Shipping Weight: 0.022 kg

Ideal For

  • Everyday use

Buying Tip

Read the full specifications and the package contents list below to make sure it does what you need.

Specifications

Input Voltage3.3V~5.5V
Voltage Range (V)0 ~ 26
Current Measuring Range DC0 ~ ±8A
InterfaceGravity I2C
Shipping Weight0.022 kg
Shipping Dimensions7 × 6 × 3 cm

Overview

The DFRobot Gravity: I2C Digital Wattmeter, made by DFRobot, is listed in our buck converter range and suits everyday home and hobby use. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Input Voltage: 3.3V~5.5V (match this to your power supply; too high a voltage can damage the part)
  • Voltage Range (V): 0 ~ 26 (quoted range is usually line-of-sight; walls and interference shorten it)
  • Current Measuring Range DC: 0 ~ ±8A (quoted range is usually line-of-sight; walls and interference shorten it)
  • Interface: Gravity I2C (confirm your cable or board uses the same connector)
  • Shipping Weight: 0.022 kg (important for drones, RC models and anything you carry)
  • Shipping Dimensions: 7 × 6 × 3 cm (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

Gravity: I2C Digital Wattmeter is a high-resolution, high-precision, large-scale measurement module that can measure the voltage, current and power of various electronic modules and electrical equipment within 26V 8A, and the maximum relative error is no more than ±0.2% . The module adopts TI INA219 zero temperature drift current/power monitoring chip and 2W high power low temperature drift 10mΩ alloy sampling resistor. The voltage and current resolution can reach 4mV and 1mA respectively. Under the full scale measurement condition, the maximum relative error of voltage and current measurement can be superior to ±0.2%. It also provides four I2C addresses that can be configured via the 2P DIP switch. The DFRobot Gravity: I2C Digital Wattmeter module accurately measures bidirectional high-side currents, which is especially useful in solar or battery fuel gauge applications where the battery needs to be charged and discharged. Gravity: I2C Digital Wattmeter status can be simply determined by positive or negative current readings. In the motor applications, the current can be monitored in real time by monitoring whether the motor current is too large due to overload. In addition, you can use this module to measure the power consumption of various electronic modules or the entire project to evaluate battery life.

Features:

  1. High precision, high resolution, large range, low temperature drift
  2. Bidirectional current high side measurement
  3. Compatible with 3.3V/5V controller
  4. Sophisticated and compact, easy to embed in the project

Applications:

  1. Solar Power Management
  2. Battery Fuel Gauge
  3. Electronic Module Power Evaluation

Package include:

1 x DFRobot Gravity: I2C Digital Wattmeter

Quick specs

Input Voltage
3.3V~5.5V
Voltage Range (V)
0 ~ 26
Current Measuring Range DC
0 ~ ±8A
Interface
Gravity I2C
Shipping Weight
0.022 kg
Shipping Dimensions
7 × 6 × 3 cm
See all specifications