Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by Dimension Engineering, this dimension engineering motor drivers is a good fit for everyday home and hobby use. Main specs: item type Sabertooth Dual Motor Driver; peak current (a) 25; cooling fan No. Check that your power source supplies 18 ~ 24 before connecting it.

Key Highlights

  • Item Type: Sabertooth Dual Motor Driver
  • Peak Current (A): 25
  • Cooling Fan: No

Ideal For

  • Robots and moving models
  • Automation projects
  • Replacement for a worn motor

Buying Tip

Check the size, weight and connector against your model, and keep spare props or parts for the first flights.

Specifications

Item TypeSabertooth Dual Motor Driver
Operating Voltage (VDC)18 ~ 24
Peak Current (A)25
Cooling FanNo
No. of Channels2
Arduino Shield (Y/N)No- can be used with Wire connection
Thermal Protection (Y/N)Yes
Over-Current Protection (A)Yes
Battery Protect. Mode (Y/N)Yes
OthersUltra-sonic switching frequency
Operating ModeAnalog, R/C, Simplified serial, Packetized serial
Polarity Protection (Y/N)Yes
Continuous Discharge Current (A)12
LED IndicatorYes
Weight (g)65
Shipping Weight0.07 kg
Shipping Dimensions10 × 8 × 4 cm

Overview

The Sabertooth Dual 12A Motor Driver, made by Dimension Engineering, is listed in our dimension engineering motor drivers range and suits everyday home and hobby use. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Sabertooth Dual Motor Driver
  • Operating Voltage (VDC): 18 ~ 24 (match this to your power supply; too high a voltage can damage the part)
  • Peak Current (A): 25 (your supply must deliver at least this much current)
  • Cooling Fan: No
  • No. of Channels: 2
  • Arduino Shield (Y/N): No- can be used with Wire connection
  • Thermal Protection (Y/N): Yes
  • Over-Current Protection (A): Yes (your supply must deliver at least this much current)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The Sabertooth Dual 12A Motor Driver is one of the most versatile, efficient and easy to use dual motor drivers on the market. It is suitable for medium powered robots - up to 30lbs in combat or 100lbs for general purpose robotics. The Sabertooth Dual 12A 6V-24V R/C Regenerative Motor Driver replaces the Dimension Engineering's Sabertooth 2X10 R/C. It is a dual motor driver specifically optimized for use in radio controlled vehicles. It is suitable for medium powered robots, cars, and boats. Out of the box, it can supply two DC brushed motors with up to 12A each. Peak currents of 25A are achievable for a few seconds. Overcurrent and thermal protection mean you'll never have to worry about killing the driver with accidental stalls or by hooking up the too big motor. Out of the box, the Sabertooth can supply two DC brushed motors with up to 12A each. Peak currents of 25A are achievable for a few seconds. Overcurrent and thermal protection, it means you'll never have to worry about killing the driver with accidental stalls or by hooking up too big a motor. Sabertooth allows you to control two motors with analog voltage, radio control, serial and packetized serial. You can build many different robots of increasing complexity for years to come with a Sabertooth. Sabertooth has independent and speed+direction operating modes, making it the ideal driver for differential drive (tank style) robots and more. The operating mode is set with the onboard DIP switches so there are no jumpers to lose. Sabertooth features screw terminal connectors - making it possible for you to build a robot without even soldering. Sabertooth is the first synchronous regenerative motor driver in its class. The regenerative topology means that your batteries get recharged whenever you command your robot to slow down or reverse. Sabertooth also allows you to make very fast stops and reverses - giving your robot a quick and nimble edge. Use of our motor drivers with cheap AC adapters is not recommended. Use a battery or at least put a battery in parallel with a DC supply.
Connection Diagram:
Sabertooth Dual 12A Motor Driver
Applications:
  1. Combat robots up to 30lb
  2. Normal and hobby robots up to 100lb
  3. Differential drive robots
  4. Electric vehicles, ride-on toys, scooters
  5. Easy speed/direction control for pumps
  6. Conveyors, automation and any application that uses two brushed DC motors

Features:

  1. 12A continuous, 25A peak per channel Up to 24V in
  2. Synchronous regenerative drive
  3. Ultra-sonic switching frequency
  4. Thermal and overcurrent protection
  5. Lithium protection mode
  6. Input modes: Analog, R/C, simplified serial, packetized serial

Package Includes:

1 x Sabertooth Dual 12A Motor Driver

1 x Mounting Nut Bolt Set and Quick Start Guide Manual


Useful Links
  1.  Software:
    1. Arduino Libraries
    2. .NET (C#, VB) Library
    3. DEScribe PC Software
  2. Application notes:
    1. Using a SyRen/Sabertooth with an ATX (or similar) DC power supply
    2. Packetized mode with a PIC and Sabertooth
    3. Using Sabertooth with Roborealm

Quick specs

Item Type
Sabertooth Dual Motor Driver
Operating Voltage (VDC)
18 ~ 24
Peak Current (A)
25
Cooling Fan
No
No. of Channels
2
Arduino Shield (Y/N)
No- can be used with Wire connection
See all specifications