Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by Dimension Engineering, this dimension engineering motor drivers is a good fit for everyday home and hobby use. Main specs: item type Sabertooth Dual Motor Driver; peak current (a) 10; cooling fan No. Check that your power source supplies 6 ~ 18 before connecting it.

Key Highlights

  • Item Type: Sabertooth Dual Motor Driver
  • Peak Current (A): 10
  • Cooling Fan: No

Ideal For

  • Robots and moving models
  • Automation projects
  • Replacement for a worn motor

Buying Tip

Check the size, weight and connector against your model, and keep spare props or parts for the first flights.

Specifications

Item TypeSabertooth Dual Motor Driver
Operating Voltage (VDC)6 ~ 18
Peak Current (A)10
Cooling FanNo
No. of Channels2
Battery Protect. Mode (Y/N)Yes
Over-Current Protection (A)Yes
Thermal Protection (Y/N)Yes
LED IndicatorYes
Continuous Discharge Current (A)5
Arduino Shield (Y/N)No- can be used with Wire connection
Dimensions (L x W x H) mm45 x 40 x 13
Weight (g)20
Shipping Weight0.03 kg
Shipping Dimensions6 × 5 × 4 cm

Overview

The Sabertooth Dual 5A Motor Driver for R/C, made by Dimension Engineering, is listed in our dimension engineering motor drivers range and suits everyday home and hobby use. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Sabertooth Dual Motor Driver
  • Operating Voltage (VDC): 6 ~ 18 (match this to your power supply; too high a voltage can damage the part)
  • Peak Current (A): 10 (your supply must deliver at least this much current)
  • Cooling Fan: No
  • No. of Channels: 2
  • Battery Protect. Mode (Y/N): Yes (note the battery type so you can order spares or the right charger)
  • Over-Current Protection (A): Yes (your supply must deliver at least this much current)
  • Thermal Protection (Y/N): Yes

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

Sabertooth Dual 5A Motor Driver for R/C is a dual motor driver specifically optimized for use in radio controlled vehicles. It is suitable for small robots, cars, and boats, and especially well suited for the Antweight and Beetleweight classes of fighting robots. Out of the box, it can supply two DC brushed motors with up to 5A each. Peak currents of 10A are achievable for a few seconds. Overcurrent and thermal protection mean you'll never have to worry about killing the driver with accidental stalls or by hooking up too big a motor. This R/C version comes with an invert channel and options for exponential control, autocalibration, and built-in mixing. The operating mode is set with the onboard DIP switches so there are no jumpers to lose. Sabertooth is the first synchronous regenerative motor driver in its class. The regenerative topology means that your batteries get recharged whenever you command your robot to slow down or reverse. Sabertooth also allows you to make very fast stops and reverses - giving your vehicle a quick and nimble edge. Sabertooth has a built in 5V BEC that can provide power to a microcontroller or R/C receiver. The lithium cutoff mode allows Sabertooth to operate safely with lithium ion and lithium polymer battery packs - the highest energy density batteries available. Sabertooth's transistor is a switch at ultrasonic speeds (32kHz) for silent operation. Use of this motor drivers with cheap AC adapters is not recommended. Use a battery or at least put a battery in parallel with a DC supply.

Connection Diagram
Applications:
  1. Ant/Beetleweight combat robots
  2. Differential drive robots up to 25lb
  3. Radio controlled tanks, cars, and boats
  4. Autonomous cyborg cats
Need more power? Take a look at Sabertooth dual 12A motor driver for R/C 

 Features:

  1. 5A continuous per channel, 10A peak
  2. Synchronous regenerative drive
  3. Ultra-sonic switching frequency
  4. Thermal and overcurrent protection
  5. Lithium protection mode-compatible with: 6-12 cell NiMH or NiCd, 2s-4s LiPo, 6V or 12V lead acid (not 18+V lead acid!)

Package Includes:

1 x Sabertooth Dual 5A Motor Driver for R/C

1 x Mounting Nut Bolt Set

1 x Quick Start Guide Manual


Useful Links:
Using a SyRen/Sabertooth with an ATX (or similar) DC power supply Building a simple robot

Quick specs

Item Type
Sabertooth Dual Motor Driver
Operating Voltage (VDC)
6 ~ 18
Peak Current (A)
10
Cooling Fan
No
No. of Channels
2
Battery Protect. Mode (Y/N)
Yes
See all specifications