
1 / 4 · Click to enlarge
AI Summary
A radio-controlled 10A relay that plugs into any standard RC receiver channel and switches high-power loads with full electrical isolation. The built-in status LED and screw terminals make setup quick and reliable.
Key Highlights
- 10A relay capacity for demanding RC and automation loads
- Plugs into standard RC receiver like a servo
- Full electrical isolation from receiver electronics
- Status LED indicates relay state and signal strength
- Wear-resistant screw terminals for secure load wiring
- Operates on 3.5 to 5.5VDC with 30mA typical draw
Ideal For
- RC combat robot builders needing reliable weapon control
- Nitro RC car and truck owners wanting glow plug activation
- Large-scale aircraft and boat pilots adding high-power lighting
- DIY home automation enthusiasts switching mains devices
- Automotive hobbyists controlling non-critical electronics
Buying Tip
Check that your receiver can supply at least 30mA on the chosen channel and that your load stays within the relay's voltage-specific current ratings (10A at 28VDC, 12A at 120VAC, 10A at 240VAC).
Elecvora expert review
Our verdict
The BattleSwitch is a straightforward, well-built solution for RC hobbyists who need to switch high-power loads without complicated wiring. Its full electrical isolation and status LED add safety and convenience that simpler relay boards often lack.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Full electrical isolation protects receiver electronics
- Status LED provides clear feedback and signal warning
- Screw terminals make load connections secure and tool-friendly
- Compact and lightweight at 18g
- Handles up to 240VAC for versatile applications
Cons
- Requires a free receiver channel and transmitter control
- Does not supply power to the load, so separate wiring is needed
- Relay life depends on load; high-current switching may reduce cycles
Best for
RC hobbyists and automation DIYers needing a reliable, isolated relay switch
Not ideal for
Users who need a complete power supply or who cannot spare a receiver channel
Specifications
| Item Type | Radio controlled relay |
|---|---|
| Relay Capacity | 10A |
| Weight (g) | 18 |
| Resistance(mΩ) | 100 |
| Operating Voltage (VDC) | 3.5 ~ 5.5 |
| Shipping Weight | 0.02 kg |
| Shipping Dimensions | 10 × 5 × 4 cm |
What's in the box
- 1 x BattleSwitch radio-controlled 10A relay module
- 1 x Small user manual
Frequently Asked Questions
What is the maximum voltage the BattleSwitch can switch?
Does the BattleSwitch provide power to the load?
What receiver voltage does it require?
What does the status LED indicate?
What is included in the package?
How many switching cycles can I expect?
Overview
The Dimension Engineering BattleSwitch is a radio-controlled relay module designed to let you switch high-power electrical loads using a standard hobby RC transmitter and receiver. Whether you need to activate glow plugs in a nitro vehicle, fire auxiliary weapons in a combat robot, or control high-powered lighting on a large aircraft or boat, the BattleSwitch provides a simple, reliable interface between your receiver and the load. It also opens up possibilities for home automation and non-critical automotive electronics, thanks to its ability to switch voltages up to 240VAC.
Key Features
- 10A relay capacity: Handles substantial current for motors, lights, and other accessories.
- Full electrical isolation: The relay contacts are completely isolated from your receiver electronics, protecting your radio gear and simplifying high-voltage switching.
- Servo-style connection: The 12-inch pigtail plugs directly into a standard RC receiver channel, just like a servo.
- Status LED: A built-in LED on the bottom illuminates when the relay is on and flashes to warn of a weak radio link.
- Screw terminals: Wear-resistant terminals provide secure, tool-friendly connections for your load wiring.
- Single-pole double-throw (SPDT) relay: Offers normally-open and normally-closed contacts for flexible switching configurations.
Specifications Explained
Relay capacity (10A): This is the maximum current the relay contacts can handle. The actual rating depends on the voltage being switched: 10A at 28VDC, 12A at 120VAC, and 10A at 240VAC. Always stay within these limits to ensure reliable operation and long relay life.
Operating voltage (3.5 to 5.5VDC): The BattleSwitch draws power from your receiver, so it works with typical 4.8V or 6V receiver batteries. It consumes about 30mA, which is similar to a standard servo and should not significantly affect your receiver's power budget.
Weight (18g): Light enough for most RC applications, including small aircraft and drones where every gram counts.
Resistance (100mΩ): The contact resistance is low, minimizing voltage drop and heat when switching moderate currents.
Lifetime (100,000 cycles): The relay is rated for approximately 100,000 switching operations, though actual life depends on the load and switching frequency. Avoid frequent switching of high-current loads to maximize lifespan.
Compatibility and Requirements
The BattleSwitch is compatible with any standard hobby RC receiver that outputs a servo signal (typically 3.5 to 5.5V). It requires a free receiver channel and a transmitter that can command that channel. The relay does not supply power at the screw terminals; you must provide the load power separately. The module comes with a small manual for reference.
Typical Uses
- Controlling glow plugs in RC nitro vehicles
- Activating auxiliary weapons in RC combat robots
- Switching high-powered lighting systems on large RC aircraft, boats, and cars
- Home automation and domestic appliance control (with appropriate safety precautions)
- Non-critical automotive electronics such as glow wire
What's in the Box
- 1 x BattleSwitch radio-controlled 10A relay module
- 1 x Small user manual
Quick specs
- Item Type
- Radio controlled relay
- Relay Capacity
- 10A
- Weight (g)
- 18
- Resistance(mΩ)
- 100
- Operating Voltage (VDC)
- 3.5 ~ 5.5
- Shipping Weight
- 0.02 kg






















