Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by FTDI, this usb interface module is a good fit for makers, students and electronics hobbyists. Main specs: model no. / name Module; data transfer rate 3MBaud; virtual com port Yes. Check that your power source supplies 1.8V to 3.3V before connecting it.

Key Highlights

  • Model No. / Name: Module
  • Data Transfer Rate: 3MBaud
  • Virtual Com Port: Yes

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Model No. / NameModule
Data Transfer Rate3MBaud
Virtual Com PortYes
No. of Channels1
InterfaceUART
USB SpeedFull Speed (12Mbps)
USB ConnectorNo USB connector, Modules plugs directly into the USB host connector
I/O pin voltage1.8V to 3.3V
Shipping Weight0.02 kg
Shipping Dimensions6 × 4 × 1 cm

Overview

The FTDI-UMFT234XD-NC-USB EZ-UART USB 2.0 to UART Interface Evaluation Board, made by FTDI, is listed in our usb interface module range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Model No. / Name: Module
  • Data Transfer Rate: 3MBaud
  • Virtual Com Port: Yes (confirm your cable or board uses the same connector)
  • No. of Channels: 1
  • Interface: UART (confirm your cable or board uses the same connector)
  • USB Speed: Full Speed (12Mbps)
  • USB Connector: No USB connector, Modules plugs directly into the USB host connector (confirm your cable or board uses the same connector)
  • I/O pin voltage: 1.8V to 3.3V (match this to your power supply; too high a voltage can damage the part)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

TheFTDI-UMFT234XD-NC-USB EZ-UART USB 2.0 to UART Interface Evaluation Board is a breakout board that converts USB 2.0 Full-Speed to UART. These modules do not have a USB connector, instead, the modules plug directly into the USB host connector and the pads of the PCB make electrical contact with the electrical contacts of the USB connector. The UART interface operates at +3.3V voltage levels, however, all I/Os are 5V tolerant USB to UART with four control bus lines, 3.3V power out limited to 50mA and 5V with as safety fuse. UART signals are available via 8 pads on the PCB. Note: For more technical details go through Datasheet in the attachment section 

Features:

  1. Easy to use
  2. Easy to interface
  3. Good quality product

Package Includes:

1 x FTDI-UMFT234XD-NC-USB EZ-UART USB 2.0 to UART Interface Evaluation Board

Quick specs

Model No. / Name
Module
Data Transfer Rate
3MBaud
Virtual Com Port
Yes
No. of Channels
1
Interface
UART
USB Speed
Full Speed (12Mbps)
See all specifications