
At a glance
Made by FTDI, this buffers and transceivers ic is a good fit for everyday home and hobby use. Main specs: manufacturer FTDI; package VQFN; data rate 12Mbaud (UART) up to 40MB/s (Sync FIFO). Check that your power source supplies 3.3V before connecting it.
Key Highlights
- Manufacturer: FTDI
- Package: VQFN
- Data Rate: 12Mbaud (UART) up to 40MB/s (Sync FIFO)
Ideal For
- Everyday use
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Manufacturer | FTDI |
|---|---|
| Package | VQFN |
| Data Rate | 12Mbaud (UART) up to 40MB/s (Sync FIFO) |
| USB Transfer Modes | Bulk |
| Interface | UART, FIFO, 2 x MPSSE, Fast serial, 8051 MCU emulation, 16 GPIOs |
| Case/Package | VQFN 56 |
| Channels | 2 |
| I/O pin voltage | 3.3V |
| Operating Temperature (°C) | -40°C to +85°C |
| Shipping Weight | 0.001 kg |
| Shipping Dimensions | 1 × 1 × 1 cm |
Overview
The FTDI-FT2232H-56Q-USB Bridge, USB to UART,FIFO USB 2.0 UART, FIFO Interface 56-VQFN (8x8), made by FTDI, is listed in our buffers and transceivers ic range and suits everyday home and hobby use. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Manufacturer: FTDI
- Data Rate: 12Mbaud (UART) up to 40MB/s (Sync FIFO)
- USB Transfer Modes: Bulk
- Interface: UART, FIFO, 2 x MPSSE, Fast serial, 8051 MCU emulation, 16 GPIOs (look up this chip to confirm it runs the firmware or libraries you plan to use)
- Case/Package: VQFN 56
- Channels: 2
- I/O pin voltage: 3.3V (match this to your power supply; too high a voltage can damage the part)
- Operating Temperature (°C): -40°C to +85°C
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
- The product may vary in shape, color, and markings as compared to the image shown depending on availability.
- Refer to the datasheet in the ATTACHMENTS section for more info. regd. the product.
Features:
- Single-chip USB to dual serial/parallel ports with a variety of configurations.
- The entire USB protocol is handled on the chip. No USB-specific firmware programming is required.
- USB 2.0 High Speed (480Mbits/second) and Full Speed (12Mbits/second) are compatible.
- Dual Multi-Protocol Synchronous Serial Engine (MPSSE) to simplify synchronous serial protocol (USB to JTAG, I2C, SPI, or bit-bang) design.
- Dual independent UART or FIFO ports are configurable using MPSSEs.
- Independent Baud rate generators.
- RS232/RS422/RS485 UART Transfer Data Rate up to 12Mbaud. (RS232 Data Rate limited by external level shifter).
- USB to parallel FIFO transfer data rate up to 10Mbyte/sec.
- Single channel synchronous FIFO mode for transfers up to 40 Mbytes/sec.
- CPU-style FIFO interface mode simplifies CPU interface design.
- MCU host bus emulation mode configuration option.
- Fast Opto-Isolated serial interface option.
Package Includes:
1 x FTDI-FT2232H-56Q-USB Bridge, USB to UART,FIFO USB 2.0 UART, FIFO Interface 56-VQFN (8x8)Quick specs
- Manufacturer
- FTDI
- Data Rate
- 12Mbaud (UART) up to 40MB/s (Sync FIFO)
- USB Transfer Modes
- Bulk
- Interface
- UART, FIFO, 2 x MPSSE, Fast serial, 8051 MCU emulation, 16 GPIOs
- Case/Package
- VQFN 56
- Channels
- 2



















