Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by FTDI, this buffers and transceivers ic is a good fit for everyday home and hobby use. Main specs: manufacturer FTDI; data rate 1MBaud; usb speed Full Speed (12Mbps). Check that your power source supplies 3.3V to 5V before connecting it.

Key Highlights

  • Manufacturer: FTDI
  • Data Rate: 1MBaud
  • USB Speed: Full Speed (12Mbps)

Ideal For

  • Everyday use

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

ManufacturerFTDI
Data Rate1MBaud
USB SpeedFull Speed (12Mbps)
USB Transfer ModesBulk
InterfaceUART
Case/PackageLQFP 32
I/O pin voltage3.3V to 5V
Operating Temperature (°C)0°C to +70°C
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

Overview

The FTDI-FT232BL- USB 2.0 Slave to UART Converter IC, made by FTDI, is listed in our buffers and transceivers ic range and suits everyday home and hobby use. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Manufacturer: FTDI
  • Data Rate: 1MBaud
  • USB Speed: Full Speed (12Mbps)
  • USB Transfer Modes: Bulk
  • Interface: UART (confirm your cable or board uses the same connector)
  • Case/Package: LQFP 32
  • I/O pin voltage: 3.3V to 5V (match this to your power supply; too high a voltage can damage the part)
  • Operating Temperature (°C): 0°C to +70°C

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The FTDI-FT232BL- USB 2.0 Slave to UART Converter IC. It is designed to provide a simple and easy way to connect a UART-based device to a USB port on a computer or other USB host. One of the key features of the FT232BL is its flexibility. It supports a wide range of UART interface options, including 7 or 8 data bits, 1 or 2 stop bits, and even odd, even, or no parity. It also supports a variety of baud rates, from 300bps to 3Mbps, and can even be programmed to use custom baud rates if necessary. The FTDI-FT232BL is available in a compact 32-pin SSOP (Shrink Small Outline Package) package, making it ideal for use in space-constrained applications. It is also designed to be easy to integrate into a wide range of systems, with support for both 3.3V and 5V logic levels. Note:
  1. The product may vary in shape, color, and markings as compared to the image shown depending on availability.
  2. Refer to the datasheet in the ATTACHMENTS section for more info. regd. the product.

Features:

  1. Single Chip USB to Asynchronous Serial Data Transfer
  2. Full Handshaking & Modem Interface Signals
  3. UART I/F Supports 7 / 8 Bit Data, 1 / 2 Stop Bits, and Odd/Even/Mark/Space/No Parity
  4. Data rate 300 => 3M Baud (TTL)
  5. Data rate 300 => 1M Baud (RS232)
  6. Data rate 300 => 3M Baud (RS422/RS485)
  7. 384 Byte Receive Buffer / 128 Byte Transmit Buffer for high data throughput
  8. Adjustable RX buffer timeout
  9. Fully Assisted Hardware or X-On / X-Off Handshaking In-built support for the event characters and line break condition
  10. Auto Transmit Buffer control for RS485
  11. Support for USB Suspend / Resume through SLEEP# and RI# pins
  12. 4.35V to 5.25V single supply operation
  13. Support for high-power USB Bus powered devices through PWREN# pin
  14. Integrated level converter on UART and control signals for interfacing with 5V and 3.3V logic
  15. Integrated 3.3V regulator for USB IO
  16. Integrated Power-On-Reset circuit
  17. Integrated 6MHz – 48Mhz clock multiplier PLL
  18. UHCI / OHCI / EHCI host controller compatible
  19. USB 1.1 and USB 2.0 compatible
  20. USB VID, PID, Serial Number, and Product Description strings in external EEPROM
  21. EEPROM programmable on-board via USB
  22. Available as a compact lead-free RoHS-compliant 32-LD LQFP package (FT232BL) or 32-LD QFN package (FT232BQ).

Package Includes:

1 x FTDI-FT232BL- USB 2.0 Slave to UART Converter IC

Quick specs

Manufacturer
FTDI
Data Rate
1MBaud
USB Speed
Full Speed (12Mbps)
USB Transfer Modes
Bulk
Interface
UART
Case/Package
LQFP 32
See all specifications