Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by FTDI, this buffers and transceivers ic is a good fit for everyday home and hobby use. Main specs: manufacturer FTDI; operating temperature (°c) -40°C to +85°C; case/package LQFP. Check that your power source supplies 5.25 V before connecting it.

Key Highlights

  • Manufacturer: FTDI
  • Operating Temperature (°C): -40°C to +85°C
  • Case/Package: LQFP

Ideal For

  • Everyday use

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

ManufacturerFTDI
Operating Temperature (°C)-40°C to +85°C
Data Rate3 Mbps
Case/PackageLQFP
Operating Supply Voltage5.25 V
No. of Pins48
No. of Receivers1
Supply Current30 mA
Dimensions (L x W x H) mm7 x 7 x 1.4
Weight (g)apprx. 1 g
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

Overview

The FTDI-FT2232D-USB Bridge, USB to UART USB 2.0 UART Interface 48-LQFP (7x7), made by FTDI, is listed in our buffers and transceivers ic range and suits everyday home and hobby use. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Manufacturer: FTDI
  • Operating Temperature (°C): -40°C to +85°C
  • Data Rate: 3 Mbps
  • Case/Package: LQFP
  • Operating Supply Voltage: 5.25 V (match this to your power supply; too high a voltage can damage the part)
  • No. of Pins: 48
  • No. of Receivers: 1
  • Supply Current: 30 mA (your supply must deliver at least this much current)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

This is FTDI-FT2232D-USB Bridge, USB to UART USB 2.0 UART Interface 48-LQFP (7x7) . The FT2232D is an updated version of FTDI’s 3rd generation USB UART / FIFO I.C. family.This device features two Multi-Purpose UART / FIFO controllers which can be configured individually in several different modes. As well as a UART interface, FIFO interface and Bit-Bang IO modes of the 2nd generation FT232BM and FT245BM devices, the FT2232D offers a variety of additional new modes of operation, including a Multi-Protocol Synchronous Serial Engine interface which is designed specifically for synchronous serial protocols such as JTAG, I2C, and SPI bus. The FT2232D is fully pin to pin compatible with the previous FT2232C and FT2232L devices. In addition to supporting all of the FT2232C / FT2232L functionality, the FT2232D has an additional interface mode, CPU FIFO mode, and is specified for -40 to +85 degrees C operation.

  Note:
  1. The product may vary in shape, color, and markings as compared to the image shown depending upon availability.
  2. Refer to datasheet in the ATTACHMENTS section for more info. regd. the product.

Features:

  1. Single chip USB to dual channel serial / parallel ports with a variety of configurations.
  2. Entire USB protocol handled on the chip...no USB specific firmware programming required.
  3. FT232B-style asynchronous serial UART interface option with full hardware handshaking and modem interface signals.
  4. UART Interface supports 7 / 8 bit data, 1 / 2 stop bits, and Odd / Even / Mark / Space / No Parity
  5. Fully assisted hardware or X-On / X-Off software handshaking.
  6. Transfer Data Rate 300 to 1 Mega Baud (RS232).
  7. Transfer Data Rate 300 to 3 Mega Baud (at TTL levels and RS422 / RS485).
  8. Auto transmit enable control for RS485 serial applications using TXDEN pin.
  9. In-built support for event characters and line break condition.
  10. Transmit and receive LED drive signals on each channel.
  11. FT245B-style FIFO interface option with bidirectional data bus and simple 4 wire handshake interface.
  12. USB to parallel FIFO transfer data rate up to 1 megabyte / second.
  13. Adjustable receive buffer timeout.
  14. Enhanced bit-bang Mode interface option with RD# and WR# strobes.
  15. New synchronous bit-bang mode interface option with RD# and WR# strobes.
  16. New Multi-Protocol Synchronous Serial Engine (MPSSE) interface option

Package Includes:

1 x FTDI-FT2232D-USB Bridge, USB to UART USB 2.0 UART Interface 48-LQFP (7x7)

Quick specs

Manufacturer
FTDI
Operating Temperature (°C)
-40°C to +85°C
Data Rate
3 Mbps
Case/Package
LQFP
Operating Supply Voltage
5.25 V
No. of Pins
48
See all specifications