Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by FTDI, this buffers and transceivers ic is a good fit for everyday home and hobby use. Main specs: manufacturer FTDI; data rate 3MBaud; usb speed Full Speed (12Mbps). Check that your power source supplies 1.8V to 5V before connecting it.

Key Highlights

  • Manufacturer: FTDI
  • Data Rate: 3MBaud
  • USB Speed: Full Speed (12Mbps)

Ideal For

  • Everyday use

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

ManufacturerFTDI
Data Rate3MBaud
USB SpeedFull Speed (12Mbps)
InterfaceUART with 4 GPIO pins
Case/PackageQFN 32
Channels1
I/O pin voltage1.8V to 5V
Operating Temperature (°C)-40°C to +85°C
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

Overview

The FTDI-FT232RNQ-USB Bridge, USB to UART USB 2.0 UART Interface 32-QFN (5x5), made by FTDI, is listed in our buffers and transceivers ic range and suits everyday home and hobby use. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Manufacturer: FTDI
  • Data Rate: 3MBaud
  • USB Speed: Full Speed (12Mbps)
  • Interface: UART with 4 GPIO pins (confirm your cable or board uses the same connector)
  • Case/Package: QFN 32
  • Channels: 1
  • I/O pin voltage: 1.8V to 5V (match this to your power supply; too high a voltage can damage the part)
  • Operating Temperature (°C): -40°C to +85°C

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The FT232RNQ is added to FTDI’s range of USB UART interface Integrated Circuit Devices. The FT232RNQ is a USB-to-serial UART interface with optional clock generator output and the new FTDIChip-ID™ security dongle feature. In addition, asynchronous and synchronous bit-bang interface modes are available. USB to serial designs using the FT232RNQ has been further simplified by fully integrating the external EEPROM, clock circuit, and USB resistors onto the device. The FT232RNQ adds two new functions compared with its predecessors, effectively making it a “3-in-1” chip for some application areas. The internally generated clock (6MHz, 12MHz, 24MHz, and 48MHz) can be brought out of the device and used to drive a microcontroller or external logic. A unique number (the FTDIChip-ID™) is burnt into the device during manufacture and is readable over USB, thus forming the basis of a security dongle that can be used to protect customer application software from being copied. The FT232RNQ is available in Pb-free (RoHS compliant) compact 28-Lead SSOP and QFN-32 packages. Note:
  1. The product may vary in shape, color, and markings as compared to the image shown depending on availability.
  2. Refer to the datasheet in the ATTACHMENTS section for more info. regd. the product.

Features:

  1. Single chip USB to asynchronous serial data transfer interface.
  2. Entire USB protocol handled on the chip – No USB-specific firmware programming required.
  3. UART interface support for 7 or 8 data bits, 1 or 2 stop bits, and odd / even / mark/space / no parity.
  4. Fully assisted hardware or X-On / X-Off software handshaking.
  5. Data transfer rates from 300 baud to 3 Megabaud (RS422 / RS485 and at TTL levels) and 300 baud to 1 Megabaud (RS232).
  6. In-built support for event characters and line break conditions.
  7. New USB FTDIChip-ID™ feature.
  8. New configurable CBUS I/O pins.
  9. Auto transmit buffer control for RS485 applications.
  10. Transmit and receive LED drive signals.

Package Includes:

1 x FTDI-FT232RNQ-USB Bridge, USB to UART USB 2.0 UART Interface 32-QFN (5x5)

Quick specs

Manufacturer
FTDI
Data Rate
3MBaud
USB Speed
Full Speed (12Mbps)
Interface
UART with 4 GPIO pins
Case/Package
QFN 32
Channels
1
See all specifications