Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by FTDI, this buffers and transceivers ic is a good fit for everyday home and hobby use. Main specs: manufacturer FTDI; usb transfer modes Bulk; data rate 3MBaud. Check that your power source supplies 1.8V to 3.3V before connecting it.

Key Highlights

  • Manufacturer: FTDI
  • USB Transfer Modes: Bulk
  • Data Rate: 3MBaud

Ideal For

  • Everyday use

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

ManufacturerFTDI
USB Transfer ModesBulk
Data Rate3MBaud
Channels1
USB ClassVendor
Operating Temperature (°C)-40°C to +85°C
USB SpeedFull Speed (12Mbps)
Case/PackageQFN 16
I/O pin voltage1.8V to 3.3V
Virtual Com PortYes
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

Overview

The FTDI-FT230XQ-USB Bridge, USB to UART USB 2.0 UART Interface 16-QFN (4x4), made by FTDI, is listed in our buffers and transceivers ic range and suits everyday home and hobby use. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Manufacturer: FTDI
  • USB Transfer Modes: Bulk
  • Data Rate: 3MBaud
  • Channels: 1
  • USB Class: Vendor
  • Operating Temperature (°C): -40°C to +85°C
  • USB Speed: Full Speed (12Mbps)
  • Case/Package: QFN 16

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

This FTDI-FT230XQ-USB Bridge, USB to UART USB 2.0 UART Interface 16-QFN (4x4) Full Speed IC offers a compact bridge to basic UART interfaces. The device is a UART, capable of operating up to 3MBaud, with low power consumption (8mA). The FT230X includes the complete FT-X series feature set and enables USB to be added into a system design quickly and easily over a UART interface. Single chip USB to asynchronous serial data transfer interface. The entire USB protocol is handled on the chip. No USB-specific firmware programming is required. Fully integrated 2048-byte EEPROM for storing device descriptors and CBUS I/O configuration. Fully integrated clock generation with no external crystal required plus optional clock output selection enabling a glue-less interface to external MCU or FPGA. Note: for more technical details go through Datasheet in the attachment section 

Features:

  1. Data transfer rates from 300 baud to 3 Mbaud.
  2. 512-byte receive buffer and 512 bytes transmit buffer utilizing buffer smoothing technology to allow for high data throughput.
  3. FTDI’s royalty-free Virtual Com Port (VCP) and Direct (D2XX) drivers eliminate the requirement for USB driver development in most cases.
  4. Configurable CBUS I/O pins.
  5. Transmit and receive LED drive signals.
  6. UART interface support for 7 or 8 data bits, 1 or 2 stop bits, and odd / even / mark/space / no parity

Package Includes:

1 x FTDI-FT230XQ-USB Bridge, USB to UART USB 2.0 UART Interface 16-QFN (4x4)

Quick specs

Manufacturer
FTDI
USB Transfer Modes
Bulk
Data Rate
3MBaud
Channels
1
USB Class
Vendor
Operating Temperature (°C)
-40°C to +85°C
See all specifications