Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by Makerbase, this tft lcd displays is a good fit for everyday home and hobby use. Main specs: display size (inch) 3.5; model no. / name TFT35; processor cortex-M4.

Key Highlights

  • Display Size (Inch): 3.5
  • Model No. / Name: TFT35
  • Processor: cortex-M4

Ideal For

  • Everyday use

Buying Tip

Read the full specifications and the package contents list below to make sure it does what you need.

Specifications

Display Size (Inch)3.5
Model No. / NameTFT35
Processorcortex-M4
Frequency(M)168
SupportedMarlin, Repetier, and Smoothieware firmware
Memory Card Compatibility320 x 240
Length (mm)110
Width (mm)70
Weight (g)75
Shipping Weight0.093 kg
Shipping Dimensions17 × 13 × 2 cm

Overview

The MakerBase MKS TFT35 Touch Screen Smart Display, made by Makerbase, is listed in our tft lcd displays range and suits everyday home and hobby use. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Display Size (Inch): 3.5 (measured diagonally; compare with the space you have before ordering)
  • Model No. / Name: TFT35
  • Processor: cortex-M4 (look up this chip to confirm it runs the firmware or libraries you plan to use)
  • Frequency(M): 168 (make sure the rest of your system works at this frequency)
  • Supported: Marlin, Repetier, and Smoothieware firmware (confirm your cable or board uses the same connector)
  • Memory Card Compatibility: 320 x 240 (more memory leaves room for larger programs and buffers)
  • Length (mm): 110 (measure your mounting space before ordering)
  • Width (mm): 70 (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

Touch screen / intelligent controller MKS TFT35 for 3D RepRap printers. The MKS TFT35 is a 3.5 "color touch screen for various RepRap or open-source 3D printers. The screen is compatible with MKS boards such as MKS Base, MKS Gen, and MKS Mini. It is easy to connect and can be easily used with Marlin. It is completely open software and allows any adjustment. To simplify an individual project, various projects can be selected in the standard internal software. In addition, 13 buttons can be freely assigned to activate various functions at the touch of a button.  

Features:

  1. Available to switch seen types of languages online.
  2. Available to preview code model and display model in the printing.
  3. Run cortex-M4 processor, 168M frequency, higher definition.
  4. With a 3.5 touch screen, simple operating interface, and high sensitivity.
  5. Upgrade the confi via SD card, easy to operate.
  6. Support for Marlin, Repetier, and Smoothieware firmware

Packages Includes:

1 x MakerBase MKS TFT35 Touch Screen Smart Display 1 X 8 Pin cable

Quick specs

Display Size (Inch)
3.5
Model No. / Name
TFT35
Processor
cortex-M4
Frequency(M)
168
Supported
Marlin, Repetier, and Smoothieware firmware
Memory Card Compatibility
320 x 240
See all specifications