
1 / 7 · Click to enlarge
At a glance
Made by Cytron, this cytron motor drivers is a good fit for makers, students and electronics hobbyists. Main specs: item type Sensor; model series Maker Series; voltage rating (v) 3.3 to 5. Check that your power source supplies 3.3 to 5 before connecting it.
Key Highlights
- Item Type: Sensor
- Model Series: Maker Series
- Voltage Rating (V): 3.3 to 5
Ideal For
- Robots and moving models
- Automation projects
- Replacement for a worn motor
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Item Type | Sensor |
|---|---|
| Model Series | Maker Series |
| Voltage Rating (V) | 3.3 to 5 |
| Operating Voltage (VDC) | DC 3.3V and 5V compatible |
| Line Width | 13 to 30 |
| Sensing Distance (mm) | 4 to 40 (Vcc = 5V, Blackline on a white surface). |
| Refresh Rate (Hz) | 200 |
| Length (mm) | 64 |
| Width (mm) | 28.6 |
| Weight (g) | 17 |
| Shipping Weight | 0.02 kg |
| Shipping Dimensions | 12 × 8 × 2 cm |
Overview
The Cytron Maker Line: Simplifying Line Sensor For Beginner , made by Cytron, is listed in our cytron motor drivers range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Item Type: Sensor
- Model Series: Maker Series
- Voltage Rating (V): 3.3 to 5 (match this to your power supply; too high a voltage can damage the part)
- Operating Voltage (VDC): DC 3.3V and 5V compatible (match this to your power supply; too high a voltage can damage the part)
- Line Width: 13 to 30 (measure your mounting space before ordering)
- Sensing Distance (mm): 4 to 40 (Vcc = 5V, Blackline on a white surface).
- Refresh Rate (Hz): 200 (make sure the rest of your system works at this frequency)
- Length (mm): 64 (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
Building a line following robot for a school project or competition Or building an Automated Guided Vehicle (AGV) for industrial use Maker Line is the right sensor for you. With 5 x IR sensors array, it is able to track lines from 13mm to 30mm in width. Line color is selectable as light (White) or dark (Black) line.
The sensor calibration is also simplified. Adjusting the potentiometer for each IR sensor is not needed anymore. Instead, press the calibrate button for 2 seconds to enter calibration mode, sweep the sensors array across the line, press the button again and you are done. The calibration data is saved in EEPROM and it will still be intact even the sensor has been powered off. Thus, Calibration only needs to be carried out once unless the sensor height, line color, or background color has changed.
Maker Line also supports dual outputs: 5 x digital outputs for the state of each sensor independently which is similar to the conventional IR sensor, but you get the benefit of easy calibration; One analog output where its voltage represents the line position. Analog output also offers higher resolution compared to individual digital outputs. This is especially useful when high accuracy is required such as building a line following robot with PID control.
Video Link - Cytron Maker Line: Simplifying Line Sensor
Features:
- Operating Voltage: DC 3.3V and 5V compatible (With reverse polarity protection).
- Recommended Line Width: 13mm to 30mm.
- Selectable line color (light or dark).
- Sensing Distance (Height): 4mm to 40mm (Vcc = 5V, Blackline on a white surface).
- Sensor Refresh Rate: 200Hz
- Easy calibration process.
- Dual Output Types: 5 x digital outputs represent each IR sensor state, 1 x analog output represents line position.
- Supports a wide range of controllers such as Arduino, Raspberry Pi, etc.
Applications:
- Line Following Mobile Robot
- Automated Guided Vehicle (AGV)
Project Links:
Building a Low-cost Line following RobotPackage Includes:
1 x MAKER-LINE
2 x PCB Stand Screw and Nut 5mm - 2pcs
2 x PCB Stand Screw and Nut 10mm
Quick specs
- Item Type
- Sensor
- Model Series
- Maker Series
- Voltage Rating (V)
- 3.3 to 5
- Operating Voltage (VDC)
- DC 3.3V and 5V compatible
- Line Width
- 13 to 30
- Sensing Distance (mm)
- 4 to 40 (Vcc = 5V, Blackline on a white surface).





















