
1 / 3 · Click to enlarge
AI Summary
The Cytron SmartDriveDuo-10 MDDS10 is a dual-channel DC motor driver with 10A continuous per channel and 7-35V input. It supports RC, PWM, analog and UART control, making robot builds quick and flexible.
Key Highlights
- Dual channel, 10A continuous per channel, 30A peak
- Wide 7-35V operating voltage for 3S-6S LiPo
- RC servo, analog, PWM and UART control modes
- Onboard temperature and overcurrent protection
- Manual test buttons and indicator LEDs
- Compact 67 x 102 x 25 mm, 52 g
Ideal For
- Combat robot builders needing reliable dual-motor control
- Sumo robot hobbyists requiring mixed-mode driving
- Robotics students learning motor control with Arduino
- Makers building differential-drive mobile robots
- RC enthusiasts converting projects to remote control
Buying Tip
Remember that the MDDS10 has no polarity protection, so always verify battery polarity before powering on.
Elecvora expert review
Our verdict
The Cytron SmartDriveDuo-10 MDDS10 is a well-designed dual motor driver that simplifies robot builds with its multiple control modes and smart protection features. It is a solid choice for intermediate to advanced robotics projects.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Wide voltage range supports many battery types
- Multiple control interfaces in one board
- Built-in thermal and overcurrent protection
- Easy RC receiver connection with header pins
Cons
- No polarity protection requires careful wiring
- Not an Arduino shield, so wiring is needed
- Peak current limited to 30A for short bursts
Best for
Combat and sumo robot builders
Not ideal for
Beginners who need plug-and-play shield compatibility
Specifications
| Item Type | Motor Driver |
|---|---|
| Model Series | MDDS Series |
| Voltage Rating (V) | 7 to 35 |
| Current Rating (A) | 10 to 30 |
| Model No. / Name | Cytron MDDS10 |
| Operating Voltage (VDC) | 7 ~ 35 |
| Peak Current (A) | 30 |
| Continuous Discharge Current (A) | 10 |
| Operating Mode | PWM (Lock-Antiphase and Sign-Magnitude): Yes, UART: Yes Analog: Yes, RC Servo Signal: Yes |
| No. of Channels | 2 |
| Overcurrent Protect. (Y/N) | Yes |
| Thermal Protection (Y/N) | Yes |
| LED Indicator | Yes |
| Test/Manual Button (Y/N) | Yes |
| Cooling Fan | No |
| Arduino Shield (Y/N) | No, can be used with Wire connection |
| Polarity Protection (Y/N) | NO |
| Dimensions (L x W x H) mm | 67 x 102 x 25 |
| Weight (g) | 52 |
| Shipping Weight | 0.057 kg |
| Shipping Dimensions | 12 × 8 × 3 cm |
Frequently Asked Questions
What motors can the MDDS10 drive?
Can I control it with an Arduino?
What is the peak current and how long can it last?
Does it have reverse polarity protection?
What is included in the box?
Can I use it with an RC receiver?
Overview
The Cytron SmartDriveDuo-10 MDDS10 is a dual-channel DC motor driver built for robotics projects such as combat and sumo robots. It combines the 10A-per-channel capability of the MDD10A with smart features from the MDS40A, giving you a versatile driver that can handle two brushed motors independently or in mixed mode. With a wide input range of 7V to 35V, it works with common battery packs including 3-cell to 6-cell LiPo and series SLA configurations.
Key Features
- Dual channel operation: Drive two brushed DC motors independently or mix them for tank-style steering.
- Multiple control modes: Accepts RC servo signals, analog voltage from a potentiometer, PWM from a microcontroller, or UART commands. Mode selection is done via onboard DIP switches.
- Smart protection: Overcurrent and thermal protection with temperature feedback that limits output current stage by stage to prevent overheating.
- User-friendly setup: Two manual/test buttons (one per channel), output indicator LEDs for each channel, plus power, error and RUN status LEDs. An onboard reset button restarts the MCU after changing operation mode.
- Quiet operation: MOSFETs switch at 16 kHz for quieter motor operation.
- RC-ready: A 2x3 header pin allows direct connection to an RC receiver with two extension cables, simplifying wiring.
Specifications Explained
Voltage rating (7-35V): This range covers many popular battery chemistries, from 2S to 6S LiPo and 12V to 24V lead-acid setups. A single power input powers both the motors and the driver.
Current rating (10A continuous, 30A peak): Each channel can handle 10A continuously, with peaks up to 30A for short bursts. The driver automatically limits output current if temperatures rise, protecting the MOSFETs.
Control modes: PWM mode supports both locked-antiphase and sign-magnitude driving, giving you flexibility in how you command speed and direction. UART control allows precise, packetized commands from a microcontroller.
Dimensions and weight: At 67 x 102 x 25 mm and 52 g, the board is compact enough for small robots while still offering robust screw terminals.
Compatibility and Requirements
The MDDS10 can be controlled by an RC receiver, a potentiometer, a microcontroller (PWM or UART), or a servo signal. It is not an Arduino shield, but it can be wired to an Arduino or similar board. Note that the driver has no polarity protection, so double-check power connections before switching on. A single power source is required for both the driver and motors.
Typical Uses
This driver is ideal for combat robots, sumo robots, and other differential-drive mobile platforms. It is also suitable for any project needing independent control of two brushed DC motors with a variety of input methods.
What's in the Box
Package contents are not specified by the manufacturer. Please refer to the product listing for details.
Quick specs
- Item Type
- Motor Driver
- Model Series
- MDDS Series
- Voltage Rating (V)
- 7 to 35
- Current Rating (A)
- 10 to 30
- Model No. / Name
- Cytron MDDS10
- Operating Voltage (VDC)
- 7 ~ 35























