Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by Cytron, this cytron motor drivers is a good fit for makers, students and electronics hobbyists. Main specs: item type Controller/Development Board; current rating (a) 0.5 to 1; supply voltage DC7-15V. Check that your power source supplies 7 to 15 before connecting it.

Key Highlights

  • Item Type: Controller/Development Board
  • Current Rating (A): 0.5 to 1
  • Supply Voltage: DC7-15V

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeController/Development Board
Voltage Rating (V)7 to 15
Current Rating (A)0.5 to 1
Supply VoltageDC7-15V
IMAX Rating1A-5V (from on-board 5V Voltage regulator), 500mA-3.3V (from on-board 3.3V Voltage regulator)
Digital I/O Pins14 (6 PWM outputs)
Analog I/O Pins6
Flash Memory32KByte
SRAM2KByte
EEPROM1KByte
Clock Speed16MHz
Length (mm)72
Width (mm)56
Shipping Weight0.08 kg
Shipping Dimensions8 × 6 × 2 cm

Overview

The Cytron Uno Board ATmega328 Microcontroller (Arduino Compatible), made by Cytron, is listed in our cytron motor drivers range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Controller/Development Board
  • Voltage Rating (V): 7 to 15 (match this to your power supply; too high a voltage can damage the part)
  • Current Rating (A): 0.5 to 1 (your supply must deliver at least this much current)
  • Supply Voltage: DC7-15V (match this to your power supply; too high a voltage can damage the part)
  • IMAX Rating: 1A-5V (from on-board 5V Voltage regulator), 500mA-3.3V (from on-board 3.3V Voltage regulator) (space for firmware, files or media)
  • Digital I/O Pins: 14 (6 PWM outputs)
  • Analog I/O Pins: 6
  • Flash Memory: 32KByte (more memory leaves room for larger programs and buffers)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

Everyone like Arduino, especially Arduino UNO. This is Cytron version of Arduino UNO R3, we called it CT-UNO!! The CT-UNO combines the simplicity of the UNO Optiboot bootloader (which load program faster), the stability of the FTDI and the R3 shield compatibility of the latest Arduino UNO R3. It has 14 Digital I/O pins with 6 PWM pins, 6 Analog inputs, UART, SPI, external interrupts, not to forget the I2C too. The SDA, SCL, and IOREF pins which being broken out on UNO R3 are on CT-UNO too. It has  ISP header pins (SPI and power). With this, CT-UNO will be compatible with all Arduino UNO shield. The board has enhanced power section of CT-UNO. You can still power the CT-UNO via the DC jack, DC7V to 15V. It has an onboard voltage regulator which has the capability to output higher current.


Features:

  1. SMD ATmega328P microcontroller with Optiboot (UNO R3) Bootloader
  2. 1A (maximum) 5V voltage regulator
  3. 500mA (maximum) 3.3V voltage regulator
  4. 0-5V outputs with 3.3V compatible inputs
  5. 14 Digital I/O Pins (6 PWM outputs)
  6. 6 Analog Inputs
  7. ISP 6-pin Header
  8. R3 Shield Compatible
  9. TX, RX, Power, pin 13 LEDs are moved to the edge
  10. Utilize USB Micro-B socket
  11. White PCB

Package Includes:

1 x Cytron Uno Board ATmega328 Microcontroller (Arduino Compatible)

Quick specs

Item Type
Controller/Development Board
Voltage Rating (V)
7 to 15
Current Rating (A)
0.5 to 1
Supply Voltage
DC7-15V
IMAX Rating
1A-5V (from on-board 5V Voltage regulator), 500mA-3.3V (from on-board 3.3V Voltage regulator)
Digital I/O Pins
14 (6 PWM outputs)
See all specifications