Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact single-channel LRA motor driver that adds controlled haptic feedback over a simple Gravity I2C connection. It includes 44 built-in vibration effects, automatic resonance tracking and ships with a cable and LRA motor.

Key Highlights

  • Single-channel driver built for LRA motors
  • TM6605 haptic driver chip with 44 vibration effects
  • Automatic resonance tracking for stable output
  • Gravity I2C interface keeps wiring simple
  • 3.7V to 5V operating voltage for common boards
  • Compact 30 x 20 mm board weighing about 5 g

Ideal For

  • Makers prototyping tactile feedback interfaces
  • Students learning I2C haptic control
  • Robotics developers adding confirmation feedback
  • Game controller and wearable designers
  • Educators building interactive demonstration kits

Buying Tip

Confirm your project uses an LRA motor rather than an ERM motor, since this driver is specified for LRA actuators only.

Elecvora expert review

Our verdict

This is a tidy, focused haptic driver that removes most of the wiring and tuning work from LRA projects. The included motor and cable make it a practical starting point for anyone new to tactile feedback.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Simple Gravity I2C connection
  • 44 built-in vibration effects
  • Automatic resonance tracking
  • Includes LRA motor and cable
  • Compact 30 x 20 mm board

Cons

  • Only one motor channel
  • Works with LRA motors only
  • Some host-side coding is still required

Best for

Makers and developers adding single-point haptic feedback to interactive devices

Not ideal for

Projects that need to drive multiple motors or ERM-type vibration motors

Specifications

Item TypeMotor Driver
Model No. / NameValue: Gravity Haptic Motor Driver for LRA Motors
CompatibilityLRA (Linear Resonant Actuator) Motors
Operating Voltage (VDC)3.7 to 5
No. of Channels01
No. of Controllable Motors1
InterfaceGravity I2C
Operating Temperature (°C)-40°C ~ +85°C
Length (mm)30
Width (mm)20
Weight (g)05
Shipping Weight0.07 kg
Shipping Dimensions7 × 5 × 3 cm

What's in the box

  • 1 x DFRobot Gravity Haptic Motor Driver for LRA Motors
  • 1 x Gravity 4pin sensor cable
  • 1 x LRA motor

Frequently Asked Questions

What type of motor can this driver control?
It is designed for LRA (Linear Resonant Actuator) motors and controls one motor on a single channel.
What voltage does the module need?
The board operates from 3.7V to 5V, which suits many common development boards and small battery supplies.
How does it connect to my board?
It uses a Gravity I2C interface, and the package includes a Gravity 4-pin sensor cable for the connection.
Does it come with a motor?
Yes. The package includes one LRA motor along with the driver board and the Gravity sensor cable.
Do I need to tune the vibration output?
No manual tuning is described, because the driver uses automatic resonance tracking to adapt to the connected LRA motor.
What temperature range does it support?
The driver is rated for operation from -40°C to +85°C.

Overview

The DFRobot Gravity Haptic Motor Driver is a small, single-channel board for adding tactile vibration to electronic projects. It is designed specifically for Linear Resonant Actuator (LRA) motors and uses the TM6605 haptic driver chip to generate controlled haptic effects. Communication happens over a Gravity I2C interface, so the module connects to a development board with a single cable instead of a bundle of jumper wires.

The board runs from 3.7V to 5V, which covers many common development boards, and it measures just 30 by 20 mm and about 5 g. Because the driver handles resonance tracking on its own, you do not need to manually tune the output for the motor you connect.

Key Features

  • Purpose-built for LRA motors: one controllable motor channel on a dedicated haptic driver.
  • TM6605 chip: delivers 44 built-in vibration effects for varied feedback patterns.
  • Automatic resonance tracking: the driver adapts to the connected LRA motor for consistent vibration.
  • Gravity I2C interface: plug-and-play wiring for fast prototyping.
  • Wide temperature range: rated for -40°C to +85°C operation.

Specifications Explained

One channel, one motor: the module controls a single LRA motor, which suits designs where one focused haptic point is enough, such as a button, a handle or a wearable alert.

3.7V to 5V input: this range matches many development boards and small battery setups, so the driver fits naturally into portable and benchtop builds.

Gravity I2C: the I2C interface keeps the wiring to two signal lines plus power, and the Gravity connector removes the need for soldering on the board side.

Small footprint: at 30 x 20 mm and roughly 5 g, the board tucks into enclosures and handheld devices without adding bulk.

Compatibility and Requirements

The driver is intended for LRA (Linear Resonant Actuator) motors and is not described for other motor types. It needs a host board with a Gravity I2C connection and a supply within 3.7V to 5V. The included Gravity 4-pin sensor cable and LRA motor let you begin testing without extra wiring parts.

Typical Uses

  • Game controllers that need rumble and impact feedback.
  • Robotics projects where a physical confirmation signal helps.
  • Control panels and physical buttons with tactile clicks and alerts.
  • VR and AR controllers or feedback gloves.
  • Wearable notification devices using distinct vibration patterns.

What's in the Box

  • 1 x DFRobot Gravity Haptic Motor Driver for LRA Motors
  • 1 x Gravity 4-pin sensor cable
  • 1 x LRA motor

Quick specs

Item Type
Motor Driver
Model No. / Name
Value: Gravity Haptic Motor Driver for LRA Motors
Compatibility
LRA (Linear Resonant Actuator) Motors
Operating Voltage (VDC)
3.7 to 5
No. of Channels
01
No. of Controllable Motors
1
See all specifications