Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by FTDI, this buffers and transceivers ic is a good fit for everyday home and hobby use. Main specs: manufacturer FTDI; data rate 12Mbaud (UART) up to 40MB/s (Sync FIFO); virtual com port Yes. Check that your power source supplies 3.3V before connecting it.

Key Highlights

  • Manufacturer: FTDI
  • Data Rate: 12Mbaud (UART) up to 40MB/s (Sync FIFO)
  • Virtual Com Port: Yes

Ideal For

  • Everyday use

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

ManufacturerFTDI
Data Rate12Mbaud (UART) up to 40MB/s (Sync FIFO)
Virtual Com PortYes
USB Transfer ModesBulk
No. of Channels2
InterfaceFIFO, Fast serial, 2 x MPSSE, UART, 8051 MCU
Case/PackageLQFP 64
USB ClassVendor
USB HostNo
Operating Temperature (°C)-40°C to +85°C
I/O pin voltage3.3V
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

Overview

The FTDI-FT2232HL-Hi-speed USB 2.0 Slave to Dual Channel UART / Serial Converter-IC, made by FTDI, is listed in our buffers and transceivers ic range and suits everyday home and hobby use. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Manufacturer: FTDI
  • Data Rate: 12Mbaud (UART) up to 40MB/s (Sync FIFO)
  • Virtual Com Port: Yes (confirm your cable or board uses the same connector)
  • USB Transfer Modes: Bulk
  • No. of Channels: 2
  • Interface: FIFO, Fast serial, 2 x MPSSE, UART, 8051 MCU (look up this chip to confirm it runs the firmware or libraries you plan to use)
  • Case/Package: LQFP 64
  • USB Class: Vendor

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

FT2232HL-Hi-speed USB 2.0 Slave to Dual Channel UART / Serial Converter-IC 5th generation of USB devices. The FT2232H is a USB 2.0 Hi-Speed (480Mb/s) to UART/FIFO IC. It has the capability of being configured in a variety of industry-standard serial or parallel interfaces. Building on the innovative features of the FT2232, the FT2232H has two multi-protocol synchronous serial engines (MPSSEs) which allow for communication using JTAG, I2C, and SPI on two channels simultaneously. The FT2232H is available in Pb-free (RoHS compliant) 64-pin LQFP/QFN and 56-pin QVFN packages. Note: for more technical details go through Datasheet in the attachment section 

Features:

  1. USB 2.0 High Speed (480Mbits/second) and Full Speed (12Mbits/second) are compatible.
  2. Dual Multi-Protocol Synchronous Serial Engine (MPSSE) to simplify synchronous serial protocol (USB to JTAG, I2C, SPI, or bit-bang) design.
  3. Dual independent UART or FIFO ports configurable using MPSSEs.
  4. Independent Baud rate generators.
  5. RS232/RS422/RS485 UART Transfer Data Rate up to 12Mbaud. (RS232 Data Rate limited by external level shifter).
  6. USB to parallel FIFO transfer data rate up to 10Mbyte/sec.
  7. Single channel synchronous FIFO mode for transfers up to 40 Mbytes/sec.
  8. CPU-style FIFO interface mode simplifies CPU interface design.
  9. MCU host bus emulation mode configuration option.
  10. Fast Opto-Isolated serial interface option.

Package Includes:

1 x FT2232HL-Hi-speed USB 2.0 Slave to Dual Channel UART / Serial Converter-IC

Quick specs

Manufacturer
FTDI
Data Rate
12Mbaud (UART) up to 40MB/s (Sync FIFO)
Virtual Com Port
Yes
USB Transfer Modes
Bulk
No. of Channels
2
Interface
FIFO, Fast serial, 2 x MPSSE, UART, 8051 MCU
See all specifications