Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by FTDI, this 16-bit microcontrollers ic is a good fit for everyday home and hobby use. Main specs: manufacturer FTDI; usb speed Full Speed (12Mbps); usb transfer modes Bulk, Isochronous, Interrupt. Check that your power source supplies 3.3V before connecting it.

Key Highlights

  • Rechargeable over USB
  • Manufacturer: FTDI
  • USB Speed: Full Speed (12Mbps)
  • USB Transfer Modes: Bulk, Isochronous, Interrupt

Ideal For

  • Everyday use

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

ManufacturerFTDI
USB SpeedFull Speed (12Mbps)
USB Transfer ModesBulk, Isochronous, Interrupt
InterfaceFIFO, SPI, USB, UART
Channels2
Case/PackageLQFP
I/O pin voltage3.3V
Operating Temperature (°C)-40°C to +85°C
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

Overview

The FTDI-VNC2-48L1C-USB Controller USB 2.0 SPI, UART Interface 48-LQFP (7x7), made by FTDI, is listed in our 16-bit microcontrollers ic range and suits everyday home and hobby use. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Manufacturer: FTDI
  • USB Speed: Full Speed (12Mbps)
  • USB Transfer Modes: Bulk, Isochronous, Interrupt
  • Interface: FIFO, SPI, USB, UART (confirm your cable or board uses the same connector)
  • Channels: 2
  • Case/Package: LQFP
  • I/O pin voltage: 3.3V (match this to your power supply; too high a voltage can damage the part)
  • Operating Temperature (°C): -40°C to +85°C

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

Vinculum-II (VNC2) is FTDI's 2nd generation of USB Host / Slave controllers. The VNC2 USB 2.0 Host-IC features a powerful 16-bit MCU core, with embedded 256KB Flash and 16KB RAM memory. The unit supports a range of flexible interfaces including UART, SPI, FIFO, and PWM. The complete USB protocol data processing is handled entirely by hardware resources within the unit freeing up processing resources for user-developed applications. The VNC2 USB 2.0 Host-IC is a fully programmable device and is supported by the new Vinculum Software Tool Suite, which provides an easy-to-use ‘C’ based development environment to enable user firmware development. The VNC2 offers a complete USB system solution in a single IC. Or alternatively, the designer can configure VNC2 with one of the many precompiled ROM files developed by FTDI to cover a range of popular interfaces. Note:
  1. The product may vary in shape, color, and markings as compared to the image shown depending on availability.
  2. Refer to the datasheet in the ATTACHMENTS section for more info. regd. the product.

Features:

  1. Dual USB 2.0 Host / Slave Controller.
  2. Embedded 16-bit Harvard architecture MCU core, with 256KBytes of Flash memory and 16Kbytes RAM.
  3. 2 x Full-Speed / Low-speed USB 2.0 ports supporting Host or Slave operation.
  4. Programmable UART interface supports up to 6MBaud transfers.
  5. 8-bit wide FIFO interface.
  6. 2 x SPI slave interfaces, 1 x SPI master interface.
  7. PWM (Pulse Width Modulation) interface.
  8. 4-channel DMA controller, and general-purpose timers.
  9. Support for reduced power modes.

Package Includes:

1 x FTDI-VNC2-48L1C-USB Controller USB 2.0 SPI, UART Interface 48-LQFP (7x7)

Quick specs

Manufacturer
FTDI
USB Speed
Full Speed (12Mbps)
USB Transfer Modes
Bulk, Isochronous, Interrupt
Interface
FIFO, SPI, USB, UART
Channels
2
Case/Package
LQFP
See all specifications