Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by Pololu, this pololu motor drivers is a good fit for everyday home and hobby use. Main specs: item type Brushed DC Motor Driver Carrier; motor driver DRV8256E; operating voltage (v) 4.5 V to 48 V. Check that your power source supplies 4.5 V to 48 V before connecting it.

Key Highlights

  • Item Type: Brushed DC Motor Driver Carrier
  • Motor Driver: DRV8256E
  • Operating Voltage (V): 4.5 V to 48 V

Ideal For

  • Robots and moving models
  • Automation projects
  • Replacement for a worn motor

Buying Tip

Check the size, weight and connector against your model, and keep spare props or parts for the first flights.

Specifications

Item TypeBrushed DC Motor Driver Carrier
Motor DriverDRV8256E
Operating Voltage (V)4.5 V to 48 V
Reverse V. Protection (Y/N)Yes
Logic Voltage (V)2.7 V to 5.5
Motor channels1
Output Current Per Channel1.9 A
Peak out. Current/channel6.4 A
PWM frequency100 kHz
Header pins solderedNo
Shipping Weight0.015 kg
Shipping Dimensions9 × 8 × 1 cm

Overview

The Pololu DRV8256E Single Brushed DC Motor Driver Carrier, made by Pololu, is listed in our pololu motor drivers range and suits everyday home and hobby use. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Brushed DC Motor Driver Carrier
  • Motor Driver: DRV8256E
  • Operating Voltage (V): 4.5 V to 48 V (match this to your power supply; too high a voltage can damage the part)
  • Reverse V. Protection (Y/N): Yes
  • Logic Voltage (V): 2.7 V to 5.5 (match this to your power supply; too high a voltage can damage the part)
  • Motor channels: 1
  • Output Current Per Channel: 1.9 A (your supply must deliver at least this much current)
  • Peak out. Current/channel: 6.4 A (your supply must deliver at least this much current)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

This is a DRV8256E Single Brushed DC Motor Driver Carrier. Texas Instruments DRV8256E is a tiny H-bridge motor driver IC that can be used for bidirectional control of a single brushed DC motor at 4.5 V to 48 V. It can supply up to about 1.9 A continuously and can tolerate peak currents up to 6.4 A for a few seconds, making it a good choice for small motors that run on a wide range of voltages. This DRV8256E uses a phase enable interface that allows bidirectional control with only one PWM signal, but it is limited to drive coast operation. The very similar DRV8256P has an IN interface instead, requiring two PWM signals for full bidirectional control, but it offers drive brake operation (which usually provides a more linear relationship between the PWM duty cycle and motor speed)

Features:

  1. Drives a single brushed DC motor
  2. Motor supply voltage: 4.5 V to 48 V
  3. Supports 1.8 V to 5 V logic voltage (5.5 V max)
  4. Output current: 1.9 A continuous (6.4 A peak)
  5. Carrier board adds reverse-voltage protection up to 40 V
  6. Compact size (0.6″×0.6″)
DRV8256E Single Brushed DC Motor Driver Carrier

Package Includes:

1 x Pololu DRV8256E Single Brushed DC Motor Driver Carrier

Quick specs

Item Type
Brushed DC Motor Driver Carrier
Motor Driver
DRV8256E
Operating Voltage (V)
4.5 V to 48 V
Reverse V. Protection (Y/N)
Yes
Logic Voltage (V)
2.7 V to 5.5
Motor channels
1
See all specifications