Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by Pololu, this pololu motor drivers is a good fit for everyday home and hobby use. Main specs: item type Brushed DC Motor Driver Carrier; motor driver MAX14870; operating voltage (v) 4.5 V to 36 V. Check that your power source supplies 4.5 V to 36 V before connecting it.

Key Highlights

  • Item Type: Brushed DC Motor Driver Carrier
  • Motor Driver: MAX14870
  • Operating Voltage (V): 4.5 V to 36 V

Ideal For

  • Robots and moving models
  • Automation projects
  • Replacement for a worn motor

Buying Tip

Check the size, weight and connector against your model, and keep spare props or parts for the first flights.

Specifications

Item TypeBrushed DC Motor Driver Carrier
Motor DriverMAX14870
Operating Voltage (V)4.5 V to 36 V
Reverse V. Protection (Y/N)Yes
Logic Voltage (V)2 V to 5.5
Motor channels1
Output Current Per Channel1.7 A
Peak out. Current/channel2.5 A
PWM frequency50 kHz
Shipping Weight0.015 kg
Shipping Dimensions11 × 9 × 2 cm

Overview

The Pololu MAX14870 Single Brushed DC Motor Driver Carrier, made by Pololu, is listed in our pololu motor drivers range and suits everyday home and hobby use. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Brushed DC Motor Driver Carrier
  • Motor Driver: MAX14870
  • Operating Voltage (V): 4.5 V to 36 V (match this to your power supply; too high a voltage can damage the part)
  • Reverse V. Protection (Y/N): Yes
  • Logic Voltage (V): 2 V to 5.5 (match this to your power supply; too high a voltage can damage the part)
  • Motor channels: 1
  • Output Current Per Channel: 1.7 A (your supply must deliver at least this much current)
  • Peak out. Current/channel: 2.5 A (your supply must deliver at least this much current)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

This is a MAX14870 Single Brushed DC Motor Driver Carrier. The MAX14870 from Maxim Integrated is a tiny H-bridge motor driver IC that can be used for bidirectional control of one brushed DC motor at 4.5 V to 36 V. It can supply up to about 1.7 A continuously and can tolerate peak currents up to 2.5 A for a few seconds, making it a good choice for small motors that run on a wide range of voltages. The MAX14870 is a great IC, but its small surface-mount package makes it difficult for the typical student or hobbyist to use; our breakout board makes it easy to use with standard solderless breadboards and 0.1″ perf boards. The board ships are populated with SMD components, including the MAX14870 and a reverse battery protection circuit. This MAX14870 Single Brushed DC Motor Driver Carrier which is a compact breakout board for Maxim’s MAX14870 motor driver offers a wide operating voltage range of 4.5 V to 36 V and can deliver a continuous 1.7 A (2.5 A peak) to a single brushed DC motor. It features a simple two-pin speed/direction interface and built-in protection against reverse voltage, under-voltage, over-current, and over-temperature.
Note: For more technical data kindly refer the attached datasheet.

Features:

  1. Single-channel H-bridge motor driver with shoot-through protection and internal free-wheeling diodes (can drive one DC motor)
  2. Motor supply voltage: 4.5 V to 36 V
  3. Output current: up to 1.7 A continuous (2.5 A peak)
  4. Simple two-pin DIR/PWM interface (one pin controls the direction and another controls speed)
  5. Active-low fault output indicates an over-current or over-temperature condition
  6. The surface-mount resistor can optionally be added to enable automatic current limiting

Package Includes:

1 x Pololu MAX14870 Single Brushed DC Motor Driver Carrier

Quick specs

Item Type
Brushed DC Motor Driver Carrier
Motor Driver
MAX14870
Operating Voltage (V)
4.5 V to 36 V
Reverse V. Protection (Y/N)
Yes
Logic Voltage (V)
2 V to 5.5
Motor channels
1
See all specifications