Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by Pololu, this pololu motor drivers is a good fit for everyday home and hobby use. Main specs: item type Dual Motor Driver Carrier; motor driver DRV8835; reverse v. protection (y/n) Yes. Check that your power source supplies 0 V to 11 V before connecting it.

Key Highlights

  • Item Type: Dual Motor Driver Carrier
  • Motor Driver: DRV8835
  • Reverse V. Protection (Y/N): Yes

Ideal For

  • Robots and moving models
  • Automation projects
  • Replacement for a worn motor

Buying Tip

Check the size, weight and connector against your model, and keep spare props or parts for the first flights.

Specifications

Item TypeDual Motor Driver Carrier
Motor DriverDRV8835
Operating Voltage (V)0 V to 11 V
Reverse V. Protection (Y/N)Yes
Logic Voltage (V)2 V to 7
Motor channels2
Output Current Per Channel1.2 A
Peak out. Current/channel1.5 A
Additional Specs.Contin. Parallel O/P Current: 2.4 A
PWM frequency250 kHz
Shipping Weight0.015 kg
Shipping Dimensions11 × 9 × 2 cm

Overview

The Pololu DRV8835 Dual Motor Driver Carrier, made by Pololu, is listed in our pololu motor drivers range and suits everyday home and hobby use. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Dual Motor Driver Carrier
  • Motor Driver: DRV8835
  • Operating Voltage (V): 0 V to 11 V (match this to your power supply; too high a voltage can damage the part)
  • Reverse V. Protection (Y/N): Yes
  • Logic Voltage (V): 2 V to 7 (match this to your power supply; too high a voltage can damage the part)
  • Motor channels: 2
  • Output Current Per Channel: 1.2 A (your supply must deliver at least this much current)
  • Peak out. Current/channel: 1.5 A (your supply must deliver at least this much current)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

This is a DRV8835 Dual Motor Driver Carrier. Texas Instruments’ DRV8835 is a tiny dual H-bridge motor driver IC that can be used for bidirectional control of two brushed DC motors at 0 V to 11 V. It can supply up to about 1.2 A per channel continuously and can tolerate peak currents up to 1.5 A per channel for a few seconds, making it an ideal driver for small motors that run on relatively low voltages. The DRV8835 is a great IC, but its small, leadless package makes it difficult for the typical student or hobbyist to use; our breakout board gives this driver the form factor of a 14-pin DIP package, which makes it easy to use with standard solderless breadboards and 0.1″ perfboards Since this board is a carrier for the DRV8835, we recommend careful reading of the DRV8835 datasheet The board ships populated with SMD components, including the DRV8835, and adds a FET for reverse battery protection.
Note: For more technical data kindly refer attached datasheet

Features:

  1. Dual-H-bridge motor driver: can drive two DC motors or one bipolar stepper motor
  2. Motor supply voltage: 0 V to 11 V
  3. Logic supply voltage: 2 V to 7 V
  4. Output current: 1.2 A continuous (1.5 A peak) per motor
  5. Motor outputs can be paralleled to deliver 2.4 A continuous (3 A peak) to a single motor
  6. Two possible interface modes: IN/IN (outputs mostly mirror inputs) or PHASE/ENABLE (one pin for direction and another for speed)

Package Includes:

1 x Pololu DRV8835 Dual Motor Driver Carrier

Quick specs

Item Type
Dual Motor Driver Carrier
Motor Driver
DRV8835
Operating Voltage (V)
0 V to 11 V
Reverse V. Protection (Y/N)
Yes
Logic Voltage (V)
2 V to 7
Motor channels
2
See all specifications