
1 / 3 · Click to enlarge
AI Summary
A discrete MOSFET stepper driver for one bipolar motor, operating from 8 V to 50 V with up to 4 A continuous per phase. SPI configuration unlocks nine microstep modes, adjustable current limiting, and stall detection for smooth, precise motion.
Key Highlights
- Wide 8 V to 50 V operating voltage range
- 4 A continuous per phase without heat sink
- Nine microstep modes from full-step to 1/256
- SPI-programmable current limit and decay settings
- Stall and back-EMF outputs for advanced control
- Reverse-voltage, under-voltage, and over-current protection
Ideal For
- Robotics builders needing high-torque stepper control
- CNC and automation projects with bipolar steppers
- Engineers using SPI for advanced motion tuning
- Makers exploring sensorless stall detection
Buying Tip
Confirm your motor's rated current and planned cooling: 4 A per phase is available without a heat sink, but 6 A requires additional cooling.
Elecvora expert review
Our verdict
A capable, well-protected stepper driver for projects that need higher voltage and current than typical modules offer. The SPI configurability and stall/BEMF outputs add flexibility for advanced motion control.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Wide 8-50 V range and 4 A continuous per phase
- Nine microstep modes down to 1/256
- SPI control of current limit and decay modes
- Stall and BEMF outputs for advanced algorithms
- Comprehensive protection features
Cons
- Header pins not soldered, requiring soldering before use
- SPI required for full configuration and advanced features
- 6 A per phase only with additional cooling
Best for
Engineers and advanced makers building high-power stepper systems with SPI control.
Not ideal for
Beginners wanting a plug-and-play driver with pre-soldered headers.
Specifications
| Item Type | Stepper Motor Driver Carrier |
|---|---|
| Motor Driver | DRV8711 |
| Operating Voltage (V) | 8 V to 50 V |
| Reverse V. Protection (Y/N) | Yes |
| Logic Voltage (V) | 1.5 V or 5.5 |
| Continuous Discharge Current (A) | 4A |
| Max. current per phase | 6A |
| Microstepping Resolution | full, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/128, 1/256 |
| Current limit control | SPI-programmable |
| Header pins soldered | No |
| Shipping Weight | 0.015 kg |
| Shipping Dimensions | 11 × 9 × 2 cm |
What's in the box
- 1 x Pololu High-Power Stepper Motor Driver 36v4
Frequently Asked Questions
What is the maximum current per phase?
What motor types does this driver support?
Do I need SPI to use this driver?
Are header pins included and soldered?
What logic voltage does the driver require?
What protections are built in?
Overview
The Pololu High-Power Stepper Motor Driver 36v4 combines the Texas Instruments DRV8711 stepper controller with external MOSFETs to drive one bipolar stepper motor at high power. It accepts an 8 V to 50 V motor supply and delivers up to 4 A continuous per phase without a heat sink or forced air flow; with sufficient additional cooling, the maximum current per phase reaches 6 A. The board is a carrier, meaning the driver IC and MOSFETs are mounted on a PCB, and header pins are not soldered so you can choose your own connectors.
Key Features
- DRV8711 controller with discrete MOSFETs for high-current handling
- SPI interface for configuring current limit, step mode, decay mode, and stall detection
- Nine step resolutions: full, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/128, and 1/256
- Optional STALL output for stall detection during microstepping
- Optional BEMF output for back-EMF-based control algorithms
- Reverse-voltage, under-voltage, and over-current protection
- Alternate mode for driving two brushed DC motors with PWM inputs
Specifications Explained
Operating voltage: The 8 V to 50 V range lets you run steppers at higher voltages than their rated coil voltage, which can improve step rate and torque at speed. Current: 4 A continuous per phase is available without extra cooling; the 6 A maximum per phase requires additional cooling. Logic voltage: The logic side accepts 1.5 V or 5.5 V, so check compatibility with your microcontroller. Microstepping: Nine modes from full-step to 1/256-step give fine control over resolution and smoothness. SPI control: Current limit, decay mode, and stall detection are set over SPI, enabling adaptive tuning for different motors and motion profiles.
Compatibility and Requirements
This driver is intended for one bipolar stepper motor. It requires a motor power supply within 8 V to 50 V and a logic-level interface (1.5 V or 5.5 V) for STEP/DIR and SPI signals. Header pins are not soldered, so you will need to solder headers or wires before use. For SPI configuration and advanced features, a microcontroller with SPI capability is required. The alternate brushed-DC mode uses PWM inputs instead of STEP/DIR.
Typical Uses
Use this driver in robotics, CNC machines, 3D printers, automated positioning systems, and any project needing precise, high-torque stepper control. The stall detection and BEMF feedback are useful for sensorless homing and advanced motion algorithms.
What's in the Box
1 x Pololu High-Power Stepper Motor Driver 36v4. Header pins are not included or soldered.

Quick specs
- Item Type
- Stepper Motor Driver Carrier
- Motor Driver
- DRV8711
- Operating Voltage (V)
- 8 V to 50 V
- Reverse V. Protection (Y/N)
- Yes
- Logic Voltage (V)
- 1.5 V or 5.5
- Continuous Discharge Current (A)
- 4A



















