
1 / 3 · Click to enlarge
AI Summary
Compact Pololu carrier for the TB67S249FTG stepper driver, supporting 10–47 V motor supply and up to 1.6 A continuous per phase. Adjustable current limiting and 1/32 microstepping make it easy to tune for smooth, quiet motion.
Key Highlights
- TB67S249FTG driver in compact 16-pin Pololu form factor
- 10 V to 47 V motor supply range
- 1.6 A continuous per phase, 4.5 A peak
- Seven microstep modes from full step to 1/32 step
- Adjustable current limit via onboard potentiometer
- Advanced Dynamic Mixed Decay and configurable Active Gain Control
Ideal For
- 3D printer and CNC builders needing compact stepper drivers
- Robotics hobbyists using bipolar stepper motors
- Automation developers prototyping motion control
- Makers upgrading from basic drivers to microstepping
- Multi-axis projects with limited board space
Buying Tip
Check that your motor’s rated current per phase is at or below 1.6 A continuous, and confirm your logic supply matches the 2 V or 5.5 V logic voltage before ordering.
Elecvora expert review
Our verdict
The Pololu TB67S249FTG carrier packs a capable microstepping driver into a compact 16-pin footprint, with useful features like adjustable current limit and Active Gain Control. It is a solid choice for builders who need fine resolution and a wide motor supply range in a small package.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Compact 16-pin Pololu form factor saves space
- Wide 10–47 V motor supply range
- Seven microstep modes including 1/32 step
- Adjustable current limit via potentiometer
- Advanced Dynamic Mixed Decay and Active Gain Control
Cons
- Header pins are not soldered, requiring soldering before use
- No reverse-voltage protection, so polarity mistakes can damage the board
- Continuous current is limited to 1.6 A per phase without extra cooling
Best for
Compact stepper motor projects needing microstepping and adjustable current
Not ideal for
High-current motors above 1.6 A continuous per phase or users who cannot solder
Specifications
| Item Type | Stepper Motor Driver Carrier |
|---|---|
| Motor Driver | TB67S249FTG |
| Operating Voltage (V) | 10 V to 47 V |
| Reverse V. Protection (Y/N) | No |
| Logic Voltage (V) | 2 V or 5.5 |
| Continuous Discharge Current (A) | 1.6 |
| Max. current per phase | 4.5 A |
| Microstepping Resolution | full, non-circular 1/2, 1/2, 1/4, 1/8, 1/16, 1/32 |
| Current limit control | potentiometer |
| Header pins soldered | No |
| Shipping Weight | 0.015 kg |
| Shipping Dimensions | 11 × 9 × 2 cm |
What's in the box
- 1 x Pololu TB67S249FTG Stepper Motor Driver Compact Carrier
Frequently Asked Questions
What is the maximum continuous current per phase?
What motor supply voltage does this carrier support?
Does it come with header pins soldered?
How do I set the current limit?
What microstep resolutions are available?
Does the board have reverse-voltage protection?
Overview
The Pololu TB67S249FTG Stepper Motor Driver Compact Carrier is a breakout board built around Toshiba’s TB67S249FTG microstepping bipolar stepper motor driver. It follows the popular 16-pin Pololu carrier layout, making it a compact option for projects where board space is limited. The carrier accepts a motor supply from 10 V to 47 V and provides a simple step-and-direction interface, so you can drive one bipolar stepper motor from a microcontroller or dedicated motion controller.
Current limiting is adjustable through an onboard potentiometer, allowing you to set the maximum output current to suit your motor. The board is rated for approximately 1.6 A continuous per phase without a heat sink or forced air flow, with a peak rating of 4.5 A per phase. Seven microstep resolutions are selectable, from full step and non-circular half step through to 1/32 step, helping you balance torque, smoothness, and speed for your application.
Key Features
- TB67S249FTG driver: Toshiba microstepping bipolar stepper driver in a compact carrier format.
- Wide motor supply range: Operates from 10 V to 47 V.
- Adjustable current limit: Onboard potentiometer lets you set the maximum current output.
- Seven microstep modes: Full step, non-circular half step, circular half step, 1/4, 1/8, 1/16, and 1/32 step.
- Advanced Dynamic Mixed Decay (ADMD): Dynamically switches between slow and fast decay by monitoring current decay for smoother operation.
- Configurable Active Gain Control (AGC): Can automatically reduce drive current by up to 40% when full torque is not needed, lowering power consumption and heat.
- Protection features: Built-in under-voltage, over-current, and over-temperature protection.
Specifications Explained
Motor supply voltage (10 V to 47 V): This is the voltage supplied to the motor driver stage, not the logic supply. A higher motor supply can help achieve higher step rates, but you must set the current limit appropriately for your motor.
Continuous current (1.6 A per phase) and peak current (4.5 A per phase): The continuous rating indicates the current the board can handle indefinitely without a heat sink or forced air flow. The peak rating is the maximum short-duration current per phase. Always set the current limit to the motor’s rated current or lower.
Logic voltage (2 V or 5.5 V): The logic interface is designed for 2 V or 5.5 V operation, so check compatibility with your controller’s logic level before connecting.
Microstepping resolution: Seven modes let you choose between full-step for maximum torque and 1/32-step for smoother, quieter motion. Non-circular and circular half-step modes offer different current waveforms for different motor behaviours.
Current limit control: The potentiometer adjusts the reference voltage that sets the maximum current. This lets you use a motor supply voltage above the motor’s rated voltage to achieve higher step rates while still protecting the motor.
Compatibility and Requirements
The carrier is intended for one bipolar stepper motor. It requires a motor power supply within 10 V to 47 V and a logic supply compatible with the 2 V or 5.5 V logic voltage specification. Header pins are not soldered, so you will need to solder headers or wires to connect the board to your system. The carrier does not include reverse-voltage protection, so take care to connect the motor supply with correct polarity.
Typical Uses
This compact driver is well suited to desktop 3D printers, CNC routers, camera sliders, robotics projects, and other applications that use bipolar stepper motors and require fine microstepping and adjustable current control. Its small footprint makes it a good choice for multi-axis setups where board space is at a premium.
What's in the Box
1 x Pololu TB67S249FTG Stepper Motor Driver Compact Carrier. Header pins are not included or soldered.

Quick specs
- Item Type
- Stepper Motor Driver Carrier
- Motor Driver
- TB67S249FTG
- Operating Voltage (V)
- 10 V to 47 V
- Reverse V. Protection (Y/N)
- No
- Logic Voltage (V)
- 2 V or 5.5
- Continuous Discharge Current (A)
- 1.6



















