
1 / 5 · Click to enlarge
At a glance
Made by Cytron, this cytron motor drivers is a good fit for everyday home and hobby use. Main specs: item type Shield, Motor Driver; model series MD Series; voltage rating (v) 3.3 to 30. Check that your power source supplies 3.3 to 30 before connecting it.
Key Highlights
- Item Type: Shield, Motor Driver
- Model Series: MD Series
- Voltage Rating (V): 3.3 to 30
Ideal For
- Robots and moving models
- Automation projects
- Replacement for a worn motor
Buying Tip
Check the size, weight and connector against your model, and keep spare props or parts for the first flights.
Specifications
| Item Type | Shield, Motor Driver |
|---|---|
| Model Series | MD Series |
| Voltage Rating (V) | 3.3 to 30 |
| Current Rating (A) | 10 to 15 |
| Supply Voltage | 3.3 to 5 |
| No. of Channels | 1 |
| Operating Voltage (VDC) | 7 to 30 |
| Peak Current (A) | 15 |
| Continuous Discharge Current (A) | 10 |
| Length (mm) | 77 |
| Width (mm) | 56 |
| Weight (g) | 30 |
| Shipping Weight | 0.033 kg |
| Shipping Dimensions | 10 × 6.5 × 3 cm |
Overview
The 10A Motor Driver Shield - MD10, made by Cytron, is listed in our cytron motor drivers range and suits everyday home and hobby use. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Item Type: Shield, Motor Driver
- Model Series: MD Series
- Voltage Rating (V): 3.3 to 30 (match this to your power supply; too high a voltage can damage the part)
- Current Rating (A): 10 to 15 (your supply must deliver at least this much current)
- Supply Voltage: 3.3 to 5 (match this to your power supply; too high a voltage can damage the part)
- No. of Channels: 1
- Operating Voltage (VDC): 7 to 30 (match this to your power supply; too high a voltage can damage the part)
- Peak Current (A): 15 (your supply must deliver at least this much current)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
For more of such Brushed DC Motor's Drivers, do not forget to check our following Category
Motor DriversFeatures :
- Bi-directional control of 1 brushed DC motor.
- Support motor voltage ranges from 7V to 25V, .
- Maximum current up to 10A continuous and 15A peak (10 seconds).
- 3.3V and 5V logic level input.
- Solid state components provide faster response time and eliminate the wear and tear of a mechanical relay.
- Fully NMOS H-Bridge for better efficiency and no heat sink is required.
- Speed control PWM frequency up to 10KHz.
- Stackable I/O header pin.
- Selectable digital pins for PWM and DIR.
Package Includes :
Quick specs
- Item Type
- Shield, Motor Driver
- Model Series
- MD Series
- Voltage Rating (V)
- 3.3 to 30
- Current Rating (A)
- 10 to 15
- Supply Voltage
- 3.3 to 5
- No. of Channels
- 1






















