Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by Cytron, this cytron motor drivers is a good fit for everyday home and hobby use. Main specs: item type Shield, Motor Driver; voltage rating (v) 6.5 to 12; current rating (a) 0.8 to 2. Check that your power source supplies 6.5 to 12 before connecting it.

Key Highlights

  • Item Type: Shield, Motor Driver
  • Voltage Rating (V): 6.5 to 12
  • Current Rating (A): 0.8 to 2

Ideal For

  • Robots and moving models
  • Automation projects
  • Replacement for a worn motor

Buying Tip

Check the size, weight and connector against your model, and keep spare props or parts for the first flights.

Specifications

Item TypeShield, Motor Driver
Voltage Rating (V)6.5 to 12
Current Rating (A)0.8 to 2
Operating Voltage (VDC)6.5 ~ 12
Peak Current (A)2
Continuous Discharge Current (A)0.8
No. of Channels2
Length (mm)69
Width (mm)57
Weight (g)30
Shipping Weight0.033 kg
Shipping Dimensions8 × 7 × 4 cm

Overview

The Cytron 2Amp Motor Driver Shield, made by Cytron, is listed in our cytron motor drivers range and suits everyday home and hobby use. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Shield, Motor Driver
  • Voltage Rating (V): 6.5 to 12 (match this to your power supply; too high a voltage can damage the part)
  • Current Rating (A): 0.8 to 2 (your supply must deliver at least this much current)
  • Operating Voltage (VDC): 6.5 ~ 12 (match this to your power supply; too high a voltage can damage the part)
  • Peak Current (A): 2 (your supply must deliver at least this much current)
  • Continuous Discharge Current (A): 0.8 (your supply must deliver at least this much current)
  • No. of Channels: 2
  • Length (mm): 69 (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

This is Cytron 2Amp Motor Driver Shield newly revised dual channel 2A motor shield. It uses L298P chip which allows control of two 5 - 26V DC brush motors with the maximum of 2A current each channel. This shield can be directly stacked onto standard Arduino UNO, Duemilanove, Leonardo, Mega and also CIKU (PIC18F4550).
We have added a few special features onto this shield. Motor power polarity protection, also fast test or manual control buttons for each channel of the motor. Adding LSS05 (Auto-calibration line sensor) to Arduino will be easy as this shield comes with the socket for it. The speed control is achieved through conventional PWM which can be obtained from Arduino's PWM output pin 5 and 6. The enable/disable of motor driver is controlled by Arduino pin 4 and 7, this is labeled as Signed magnitude control. You have the option to configure it to become Locked Anti-phase which uses PWM signal to decide direction, speed and also start/stop of the motor. The control modes can be configured from jumpers and also program. The Motor shield can be powered directly from Arduino or from the external power source (jumper to select). It is strongly encouraged to use the external power supply to power the motor shield. This module is compatible with following Arduino versions, click on their name below to buy them Arduino UNO Arduino Leonardo Arduino MEGA

Features :

  1. Logic control, 5V from Arduino main board
  2. Polarity protection for External motor power input
  3. 2 fast test buttons for each motor channel
  4. 2 indicator LEDs for each channel
  5. bi-directional control of two DC brush motor
  6. Motor Driven Voltage:6.5 to 12VDC(VIN Power Supply), 5.0 to 26VDC (External Power Source)
  7. Up to 2A current each channel
  8. Pin 4, 5,6,7 are used to drive two DC motor
  9. Support PWM speed control
  10. Support  advance speed control
  11. Socket for LSS05 - Auto-Calibrating Line Sensor, doing line following robot will be easy

Package Includes :

1 x Cytron 2Amp Motor Driver Shield

Tutorial :
"Tutorial using 2A Motor Driver Shield (serial control)" "Tutorial - Temperature control Motor." "Tutorial - CIKU + 2A Motor shield, also LSS05 as line following robot." "Arduino Edubot using 2Amp Motor Driver Shield, line following mobile robot." "MD10C with Arduino - Explain Sign-Magnitude vs Lock Anti-phase."

Quick specs

Item Type
Shield, Motor Driver
Voltage Rating (V)
6.5 to 12
Current Rating (A)
0.8 to 2
Operating Voltage (VDC)
6.5 ~ 12
Peak Current (A)
2
Continuous Discharge Current (A)
0.8
See all specifications