Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by Pololu, this pololu motor drivers is a good fit for everyday home and hobby use. Main specs: item type Stepper Motor Driver Carrier; motor driver AMIS-30543; reverse v. protection (y/n) Yes. Check that your power source supplies 6 V to 30 V before connecting it.

Key Highlights

  • Item Type: Stepper Motor Driver Carrier
  • Motor Driver: AMIS-30543
  • Reverse V. Protection (Y/N): Yes

Ideal For

  • Robots and moving models
  • Automation projects
  • Replacement for a worn motor

Buying Tip

Check the size, weight and connector against your model, and keep spare props or parts for the first flights.

Specifications

Item TypeStepper Motor Driver Carrier
Motor DriverAMIS-30543
Operating Voltage (V)6 V to 30 V
Reverse V. Protection (Y/N)Yes
Logic Voltage (V)2.5 to 5.5
Continuous Discharge Current (A)1.8
Max. current per phase3A
Microstepping Resolutionfull, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/128
Shipping Weight0.015 kg
Shipping Dimensions11 × 9 × 2 cm

Overview

The Pololu AMIS-30543 Stepper Motor Driver Carrier, made by Pololu, is listed in our pololu motor drivers range and suits everyday home and hobby use. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Stepper Motor Driver Carrier
  • Motor Driver: AMIS-30543
  • Operating Voltage (V): 6 V to 30 V (match this to your power supply; too high a voltage can damage the part)
  • Reverse V. Protection (Y/N): Yes
  • Logic Voltage (V): 2.5 to 5.5 (match this to your power supply; too high a voltage can damage the part)
  • Continuous Discharge Current (A): 1.8 (your supply must deliver at least this much current)
  • Max. current per phase: 3A (your supply must deliver at least this much current)
  • Microstepping Resolution: full, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/128

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

This is an AMIS-30543 Stepper Motor Driver Carrier. This stepper motor driver lets you control one bipolar stepper motor at up to 3 A output current per coil. This is a breakout board for ON Semiconductor’s AMIS-30543 micro-stepping bipolar stepper motor driver, which features SPI-adjustable current limiting, 11 step modes (from full-step through 1/128-step), back-EMF feedback that can be used for stall detection or optional closed-loop control, and over-current and over-temperature protection. The board operates from 6 V to 30 V and can deliver up to approximately 1.8 A per phase without a heat sink or forced air flow (it is rated for 3 A per coil with sufficient additional cooling).
Note: For more technical data kindly refer to the attached datasheet

Features:

  1. Standard step and direction control interface
  2. SPI interface for configuring settings (e.g. step mode, current limit, sleep) and reading status registers
  3. Speed and load angle output that can be used for stall detection or closed-loop control of the torque and speed based on the load angle
  4. Eleven different step modes: full-step (uncompensated, compensated 1-phase, or compensated 2-phase), half-step (uncompensated or compensated), 1/4-step, 1/8-step, 1/16-step, 1/32-step, 1/64-step, and 1/128-step
  5. SPI-programmable current control (from 132 mA to 3 A) enables your microcontroller to adjust the peak-current limit on the fly as more or less torque or speed is needed
  6. Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay)
  7. Low-EMI PWM with SPI-selectable voltage slopes

Package Includes:

1 x Pololu AMIS-30543 Stepper Motor Driver Carrier

Quick specs

Item Type
Stepper Motor Driver Carrier
Motor Driver
AMIS-30543
Operating Voltage (V)
6 V to 30 V
Reverse V. Protection (Y/N)
Yes
Logic Voltage (V)
2.5 to 5.5
Continuous Discharge Current (A)
1.8
See all specifications