Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by Pololu, this pololu motor drivers is a good fit for everyday home and hobby use. Main specs: item type High-Power Motor Driver; motor driver DRV8848; operating voltage (v) 6.5 V to 40 V. Check that your power source supplies 6.5 V to 40 V before connecting it.

Key Highlights

  • Item Type: High-Power Motor Driver
  • Motor Driver: DRV8848
  • Operating Voltage (V): 6.5 V to 40 V

Ideal For

  • Robots and moving models
  • Automation projects
  • Replacement for a worn motor

Buying Tip

Check the size, weight and connector against your model, and keep spare props or parts for the first flights.

Specifications

Item TypeHigh-Power Motor Driver
Motor DriverDRV8848
Operating Voltage (V)6.5 V to 40 V
Reverse V. Protection (Y/N)Yes
Logic Voltage (V)1.8 V to 5.5
Motor channels1
Output Current Per Channel13 A
Current sense0.04 V/A
PWM frequency100 kHz
Shipping Weight0.02 kg
Shipping Dimensions8 × 6 × 4 cm

Overview

The Pololu G2 High-Power Motor Driver 24v13, made by Pololu, is listed in our pololu motor drivers range and suits everyday home and hobby use. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: High-Power Motor Driver
  • Motor Driver: DRV8848
  • Operating Voltage (V): 6.5 V to 40 V (match this to your power supply; too high a voltage can damage the part)
  • Reverse V. Protection (Y/N): Yes
  • Logic Voltage (V): 1.8 V to 5.5 (match this to your power supply; too high a voltage can damage the part)
  • Motor channels: 1
  • Output Current Per Channel: 13 A (your supply must deliver at least this much current)
  • Current sense: 0.04 V/A (your supply must deliver at least this much current)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

This is a Pololu G2 High-Power Motor Driver 24v13. The Pololu G2 high-power motor driver is a discrete MOSFET H-bridge designed to drive large brushed DC motors. The H-bridge is made up of one N-channel MOSFET per leg; the rest of the board contains the circuitry to take user inputs and control the MOSFETs. The absolute maximum voltage for this motor driver is 40 V, and higher voltages can permanently destroy the motor driver. Under normal operating conditions, ripple voltage on the supply line can raise the maximum voltage to more than the average or intended voltage, so a safe maximum voltage is approximately 34 V. The versatility of this Pololu G2 High-Power Motor Driver 24v13 makes it suitable for a large range of currents and voltages: it can deliver up to 13 A of continuous current with a board size of only 1.3″ × 0.8″ and no required heat sink. The module offers a simple interface that requires as few as two I/O lines while still allowing for your choice of sign-magnitude or locked-antiphase operation. A current sense output gives an indicator of motor current, and the driver can limit the motor current to a configurable threshold. The power supply inputs feature reverse-voltage protection, while integrated detection of various fault conditions helps protect against other common causes of catastrophic failure.

Features:

  1. Operating voltage: 6.5 V to 40 V (absolute maximum)
  2. Output current: 13 A continuous
  3. PWM operation up to 100 kHz
  4. Current sense output proportional to motor current (approx. 40 mV/A; only active while H-bridge is driving)
  5. Active current limiting (chopping) with default threshold of 30 A (can be adjusted lower)
  6. Under voltage shutdown

Package Includes:

1 x Pololu G2 High-Power Motor Driver 24v13

Quick specs

Item Type
High-Power Motor Driver
Motor Driver
DRV8848
Operating Voltage (V)
6.5 V to 40 V
Reverse V. Protection (Y/N)
Yes
Logic Voltage (V)
1.8 V to 5.5
Motor channels
1
See all specifications