Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by Pololu, this pololu motor drivers is a good fit for everyday home and hobby use. Main specs: item type Stepper Motor Driver Carrier; motor driver MP6500; operating voltage (v) 4.5 V to 35 V. Check that your power source supplies 4.5 V to 35 V before connecting it.

Key Highlights

  • Item Type: Stepper Motor Driver Carrier
  • Motor Driver: MP6500
  • Operating Voltage (V): 4.5 V to 35 V

Ideal For

  • Robots and moving models
  • Automation projects
  • Replacement for a worn motor

Buying Tip

Check the size, weight and connector against your model, and keep spare props or parts for the first flights.

Specifications

Item TypeStepper Motor Driver Carrier
Motor DriverMP6500
Operating Voltage (V)4.5 V to 35 V
Reverse V. Protection (Y/N)No
Logic Voltage (V)2.1 V to 6
Continuous Discharge Current (A)1.5
Max. current per phase2.5 A
Microstepping Resolutionfull, 1/2, 1/4, and 1/8
Current limit controlpotentiometer
Header pins solderedNo
Shipping Weight0.015 kg
Shipping Dimensions11 × 9 × 2 cm

Overview

The Pololu MP6500 Stepper Motor Driver Carrier, Potentiometer Current Control, made by Pololu, is listed in our pololu motor drivers range and suits everyday home and hobby use. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Stepper Motor Driver Carrier
  • Motor Driver: MP6500
  • Operating Voltage (V): 4.5 V to 35 V (match this to your power supply; too high a voltage can damage the part)
  • Reverse V. Protection (Y/N): No
  • Logic Voltage (V): 2.1 V to 6 (match this to your power supply; too high a voltage can damage the part)
  • Continuous Discharge Current (A): 1.5 (your supply must deliver at least this much current)
  • Max. current per phase: 2.5 A (your supply must deliver at least this much current)
  • Microstepping Resolution: full, 1/2, 1/4, and 1/8

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

This is a MP6500 Stepper Motor Driver Carrier. This stepper motor driver lets you control one bipolar up to approximately 1.5 A per phase continuously without a heat sink or forced air flow. This breakout board for the MPS MP6500 micro stepping bipolar stepper motor driver has a pinout and interface that are very similar to that of our popular A4988 carriers so it can be used as a drop-in replacement for those boards in many applications. The MP6500 Stepper Motor Driver Carrier offers up to 1/8-step micro stepping, operates from 4.5 V to 35 V, and can deliver up to approximately 1.5 A per phase continuously without a heat sink or forced air flow (up to 2.5 A peak). This MP6500 Stepper Motor Driver Carrier version of the board uses an on-board trimmer potentiometer for setting the current limit, and the board ships with 0.1″ male header pins included but not soldered in.
Note: For more technical data kindly find the attached datasheet

Features:

  1. Simple step and direction control interface
  2. Four different step resolutions: full-step, half-step, 1/4-step, and 1/8-step
  3. Adjustable current control lets you set the maximum current output, which lets you use voltages above your stepper motor’s rated voltage to achieve higher step rates
  4. Potentiometer Current Control uses an on-board trimmer potentiometer to set the current limit up to 2.5 A
    • with header pins included but not soldered
    • with header pins soldered
  5. Internal current sensing allows the driver to automatically adjust the decay mode as necessary to provide the smoothest current waveform
  6. 4.5 V to 35 V supply voltage range
  7. Can deliver 1.5 A per phase continuously without additional cooling
MP6500 Stepper Motor Driver Carrier

Package Includes:

1 x Pololu MP6500 Stepper Motor Driver Carrier, Potentiometer Current Control

Quick specs

Item Type
Stepper Motor Driver Carrier
Motor Driver
MP6500
Operating Voltage (V)
4.5 V to 35 V
Reverse V. Protection (Y/N)
No
Logic Voltage (V)
2.1 V to 6
Continuous Discharge Current (A)
1.5
See all specifications